Re: Gateway 19" FPD1975W help needed
I will be hopefully ordering the caps from Digikey at some point today, once I get them in and replace them I will let you know if I have success.
Thank you all for the help, I greatly appreciate it.
Catevari
New Member
Last Activity: 09-28-2011, 12:40 PM
Joined: 09-26-2011
Location:
-
Re: Gateway 19" FPD1975W help needed
Alright, I guess I will go with my list since it appears well. Going to have my dad look it over since he's dealt more with caps then I have also just to ensure so he can measure and double check everything. Going to go with Digikey since I trust Panasonic caps.
As a side note I was planning on ordering the caps for the mainboard and redoing them as well as a failsafe, should I bother with them since you say they are subject to a lot less stress or take care of them while I am at it like I was initially planning.
...Leave a comment:
-
Re: Gateway 19" FPD1975W help needed
Ok, I thought those three were slightly bulged so I figured those would be the culprits. Will search Digikey and post a list
4.7uf 50v: P10315-ND EEU-FC1H4R7 CAP ALUM 4.7UF 50V FC Panasonic - ECG 4.7uF 50V ±20% 1000 Hrs @ 105°C
100uf 16v: PCE3996CT-ND EEE-FC1C101P CAP ALUM 100UF 16V FC Panasonic - ECG 100uF 16V ±20% 1000 Hrs @ 105°C
220uf 16v: P11199-ND EEU-FC1C221 CAP ALUM 220UF 16V FC Panasonic - ECG 220uF 16V ±20% 2000 Hrs @ 105°C
10uf 16v: PCE3995CT-ND EEE-FC1C100R CAP ALUM 10UF 16V FC Panasonic...Last edited by Catevari; 09-27-2011, 12:46 AM.Leave a comment:
-
Re: Gateway 19" FPD1975W help needed
Ok, I thought those three were slightly bulged so I figured those would be the culprits. Will search Digikey and post a listLeave a comment:
-
Re: Gateway 19" FPD1975W help needed
I apologize retiredcaps. I'll fix it ASAP. I didn't realize and will upload them here and make them a spread. I know Samxon are on the list of badcaps which is why I figured I would replace all of them, I was just hoping someone could tell if that was the cause or not for the monitor to have the issue. I will try a multimeter on them but if I am replacing them anyway if some are noticeable as bad then I will just replace and not bother testing.
Working on uploading to the badcaps server but it said a security token was missing,...Last edited by Catevari; 09-26-2011, 11:11 PM.Leave a comment:
-
Re: Gateway 19" FPD1975W help needed
Here are the pictures of each of the capacitors
<Images removed due to being Inline - trying to make a thumb spread but keep getting: Your submission could not be processed because a security token was missing. If this occurred unexpectedly, please inform the administrator and describe the action you performed before you received this error.">
Hopefully those are good enough to go by. Please let me know what you think.
I wrote down the different caps. I know I should go for 105c low...Last edited by Catevari; 09-26-2011, 11:15 PM.Leave a comment:
-
Re: Gateway 19" FPD1975W help needed
Alrighty, with both of your help, the case is off and I have the PCB's removed to get to the capacitors. I'm getting ready to take pictures of them to see if they are indeed the problem child. A few look like the top is arched but not exactly blown, but doesn't that usually mean that they went anyway?
Pictures in like 5-10 minutesLeave a comment:
-
Re: Gateway 19" FPD1975W help needed
Will do, just frustrating that it has to go two days prior to the new one being delivered. Once I get the black interior bezel off then I should give it a go at prying the bottom seem open again?Leave a comment:
-
Gateway 19" FPD1975W help needed
Hello,
First post here, found this site due to having my Gateway 19" FPD1975W finally start having issues. It started having problems turning on, the power light would light up full blue, dim, then off, and it would be stuck doing that in a loop while the monitor tried to do its warmup and display the Gateway logo. I finally got it back working and just was leaving it and the computer on in hopes it would survive till sometime this Thursday when I get my new 27" Planar.
My hopes is, like in the on nice forum post on here with PlainBill's help about the capacitors...
No activity results to display
Leave a comment: