Re: Samsung SyncMaster 226BW

I'd like to thank for the help this forum provided in making my monitor work again!
Special thanks goes out to retiredcaps for answering my questions in detail.

Badcaps.net is definitely one of the best examples why the Internet is such a great thing!

Re: Samsung SyncMaster 226BW

Thank you again, retiredcaps! Everythings's clear now.
I'm ordering the new caps next Monday...

Re: Samsung SyncMaster 226BW

Hello again!

Sorry, but I have no proper equipment to make quality photos.
Anyway, looked up all the specs of the caps to be replaced:
C111,C112,C114,C316,C317 : CapXon GL 820uF 25V 10x20 - Ripple: 1560mA @100kHz, ESR: 0.043 Ohm
C113 : CapXon GL 330uF 25V 10x12.5 - Ripple: 720mA @100kHz, ESR: 0.082Ohm
C118 : CapXon GL 2.2uF 50V 5x11 - Ripple: 33mA @100kHz, ESR: 2.6Ohm
C318 : CapXon GL 22uF 50V 6.3x11 - Ripple: 135mA @100kHz, ESR: 1 Ohm
C107 : CapXon KM 47uF 50V 6.3x11 - Ripple: 115mA @120 Hz!, ESR: ???...

Re: Samsung SyncMaster 226BW



Thank you very much for the advice and the link. Fortunately I haven't ordered the new caps yet . It'll probably be Panasonic FR-series then (after cross-checking specs with the originals), and all caps will be replaced except the big one.

Will be back when I have more news... Thanks again!...

Re: Samsung SyncMaster 226BW

Hello all,

This is my first post here. I found the site while searching for info on the same problem as (it seems) a lot of people: I also happen to have a faulty Samsung Syncmaster 226bw monitor. The same 6 caps as in most cases (C111, C112, C113, C114, C316 and C317 - see post #267 above from darael for example) in the power supply are puffy and I'm planning on replacing them. (They are all CapXon GL series caps, and the monitor is about 3 years old.)

My only question at the moment: Is the Rubycon ZLH series O.K. for this...