Re: HP Envy 27 (C8K32AA) IPS LED monitor, flash dump needed


Had the same issues with freezing and powering the monitor down. I tried to replace the EEPROM chip with 25L8005M2C, flash it the one from my original chip and with the dump from the link above, but in vain. The monitor was still powering down after a minute or so. Then I added a 630uF capacitor close to the VCC stabilizer and a 100nF capacitor close to the new EEPROM chip and now the monitor works OK with 2 extra capacitors, new EEPROM chip and the new dump. Hope this helps.

I attach the original dump...