Re: Password for Unbranded NUC-like Board BIOS
Thanks for your advise, I'll try if I get time to look into that.
For the board, it shipped without case, there's no direct description for the usage.
When I check the model in POST screen, it should be the motherboard of video conference device, but retail version have different I/O ports, so I guess it's kind of engineering sample board for that product....
Radar_Cap
New Member
Last Activity: 07-20-2022, 06:04 PM
Joined: 06-17-2022
Location: Pensacola
-
Re: Password for Unbranded NUC-like Board BIOS
Yes, it worked! Appreciate your help!
[ATTACH]267255[/ATTACH]
By the way, it seeems this is a solid passowrd. Either you set the password or not.
Even I clean the password in BIOS setup. Still need to type in this default password to make the machine boot.
Is that possible to remove this default password check?
Thanks!Re: Password for Unbranded NUC-like Board BIOS
Yes, it worked! Appreciate your help!
[ATTACH]267255[/ATTACH]...Last edited by Radar_Cap; 06-27-2022, 08:22 PM.Leave a comment:
-
Re: Password for Unbranded NUC-like Board BIOS
Hi, AAAC
I programmed the SPI flash chip with your patched file.
Good news is it didn't get brick, bad news is the password still there.
As your advice.
Actually before I upload the dump, SPI flash was read for several times, all the dump files are identical.
For hardware reset method, the board doesn't have CLR_CMOS jumper, CMOS battery was removed at the first beginning.
When I checked similar boards' manual, there's a way for short connect...Leave a comment:
-
Password for Unbranded NUC-like Board BIOS
Hello
I got a NUC-like motherboard.
Unfortunately it's with Boot password, unable to boot or enter BIOS setup.
[ATTACH]266642[/ATTACH]
It's AMI BIOS as we can see from the POST screen.
[ATTACH]266637[/ATTACH]
I use CH341a programmer to get the dump of only SPI flash chip(W25Q128JVSIQ) on this board.
Tried to find AMITSESETUP with the bin file, but following HEXs are empty.
[ATTACH]266638[/ATTACH]
Please help with decrypt password or removal.
Thanks!Hello
I got a... -
Re: New Members - please post your introductions here
Hi, there.
This is Radar. By searching decrypt Bios password in google, I found this forum.
With so many usful information, I 'm new member here!Leave a comment:
No activity results to display
Leave a comment: