Hello everyone,

Thanks in advance for any help you can provide.

I have a Mi Curved Gaming Monitor 34". A few weeks ago it started to show (or not showing) horizontal lines. Of course, it's outside of the warranty period.

After some hours of reading and watching videos I disassembled the monitor and checked the ribbons that go from the TCON board to the panel PCB. If I disconnect the ribbon for the right side of the panel, the other half shows a perfect image. I ordered a "new" TCON, installed it and the issue persists so that tells me it must...

Re: IRG4PC50U Component compatibility for repair

Thanks for your answers.

I'm a noob, so I don't know what's a difference that "breaks the deal" in component characteristics.

I'm attempting to repair the control board of a DeDietrich induction hob. Two of the IGBTs were shorted. I did check the other control board, so I know that's not normal. I took them out and the short is gone. I watched a video about how to check IGBTs out of the circuit and they are definitely broken.

I know that's not enough to be sure that's the issue...

Hi everyone.

I have a quick one (I hope). I have to swap two IGBTs with part number IRG4PC50U but the warehouse sent me IRG4PC50W.

Are these compatible? Or should I reorder the IRG4PC50U?

Thanks!

P.S: Here I leave the links for the data sheets:

[url]https://cdn.badcaps-static.com/pdfs/d4364bf1cb14461b7c1ad0b1a5ae1be0.pdf[/url]

[url]https://cdn.badcaps-static.com/pdfs/9259f2e226ddce42129e51c808f92158.pdf[/url]https://Hi everyone.<br /> <br /> ...th part number

Re: New Members - please post your introductions here

Hello everyone!

My name is Enrique and I'm from Spain.

I'm not "electronics savvy" but once it's broken, there's not much loss in trying, so... I try.

I've been building PCs for 30 years, building RC cars, planes, helicopters and drones for more than 20 years and fumbling around repairing electronics for the same amount of time.

Thanks for having me!