Re: Marshall Stanmore Repair

Can somebody tell me what the value is of L13? Turns out while assembling everything together, this one was broken (no burn marks). Can't exactly tell what the colours have been. Looks like it is similar to L7 next to it but I'm not sure.
Is this an inductor?

Re: Marshall Stanmore Repair

Intersting follow up: after placing the bluetooth module back in the Stanmore, all seems to work again. Guess the module had to get a proper connect somehow.

Re: Marshall Stanmore Repair



Today I am trying to fix this one from work that has the problem that the bluetooth source is on for a brief moment and then goes off. Everything works but bluetooth.

After Googling, poking around and doing measurements I discovered that the pin mentioned by Jeff should be 3.3V and not 5. That pin leads directly to the bluetooth breakout board and also to MC34063A. That pin on the breakout board is labeled as 3.3V.

I found this site: [url]http://www.sicken.ch/pi/en/Marken/Audio-pro/audio-pro-bluetooth-modul-t10-e224772.html[/url]...