Re: prima 26k7e power board replacement or mod
24volt, mhhmm.... i tried 5 volt to be safe and a blue light comes on but very dim and no response nor picture so i will try 12v then move up from there up to 24v
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
prima 26k7e power board replacement or mod
Hi there, i got a prima 26k7e from a friend, said it doesn't power on, thought it would be as simple as a fuse but of course my luck runs thin and 3 components fried so not worth fixing so was asking if anyone know where i can find a replacement or if anyone know the voltages that runs through all of the red wires and if can someone tell me what the brown and purple wire does so i can build one off of another broken tv i have, ill post a picture....
-
Weird Plasma Problem, need help Please?
hi everyone, im having a weird problem with my samsung LN-t401fx plasma so this what happens, i turn it on i get a bunch of vertical colorful lines that cover the whole screen so i leave like that for 10 min then i turn it off then turn it back on and the tv is turning on and off constantly with no picture or back lighting so i leave it like that for another 10 min then i turn if off then back on i get a picture but with some stuck pixels and random small black dots flashing all over the screen then i turn it off then back on and the screen is perfect like if nothing ever happens? whats wrong...
-
Re: Chimei DAC 19M009 Power supply Problem
so i get no voltage at the pins, the cap is close to your voltage predictions and what is the Vcc? :P ill post pictures tomorrow, if you can can u use the other pictures in the thread thx. and I really appreciate your help Bill.
Leave a comment:
-
Re: Chimei DAC 19M009 Power supply Problem
srry about that i didn't realise until yesterday and yea it does work but i get no power and what seems like a transformer right by the bridge rectifier makes a weird but faint sound when i plug it in. also when i first pulled this out, there was 3 bad caps so i did replace them but nothing and i did in fact have a 19m010 BF but mine is a 19m009 AF so still i tried putting that in it did turn on then it turned off (not surprised) since they were different models. and i did check the rectifier, its good. help will be appreciated.
Leave a comment:
-
Re: Chimei DAC 19M009 Power supply Problem
hi im having the same problem where i get no power, lucky i found a fuse at c121 that seems dead says my multimeter im wondering if this could be my issue and does anyone know what fuse i need
Leave a comment:
-
Re: Proscan LCD turns off after 1 second
heres a better picture:
[url]http://*************/g/585/pic2612.jpg/[/url]
i did some test with my ohms meter and all the caps seems good, i was getting electricity to flow through but i dont know if that means the caps are ok.Re: Proscan LCD turns off after 1 se...that means the
Leave a comment:
-
Proscan LCD turns off after 1 second
hi i have a 32" proscan LCD and whats happening is that the back light turn off after 1 sec but the power light stays on but the LED on the Power board just keeps blinking after the back light turns off? i need help on this heres some pitures of the board. And i looked at the caps and they all look good. and before it used to take several minutes to turn off but got wrost after time. anyone knows the issue could it be the polyester film cap by the inverters?
[url]http://*************/g/231/dsc07813l.jpg/[/url]https://hi i have a 32" proscan LCD ...s happening is
No activity results to display
Show More
Leave a comment: