Ok, I am pleased to report that my parts did come in this afternoon, and that I now have a functional monitor again!!!!!!!!!
Thank You to Everyone that helped !!!!!!!!!!!!!!!!!!!!!
Don P
New Member
Last Activity: 01-31-2012, 12:16 PM
Joined: 08-22-2011
Location: Salisbury, Ma
-
Re: Need help DCLCD 19" LCD Monitor - I already replaced caps
Ok, I am pleased to report that my parts did come in this afternoon, and that I now have a functional monitor again!!!!!!!!!
Thank You to Everyone that helped !!!!!!!!!!!!!!!!!!!!!
-
Re: Need help DCLCD 19" LCD Monitor - I already replaced caps
Excellent, although the having the right spacing between the leads will make it a bit easier. at this point, I would guess it's ok to place the order?
Thanks Again..
Leave a comment:
-
Re: Need help DCLCD 19" LCD Monitor - I already replaced caps
Yikes !!!!!!!!!!!!!! Thank You !!!!!!!!!! I had the wrong stuff.. my 10 & 220 uF were ok, but you hit the caps right on the head!!!!!!! my 1000 & 470 were both the wrong size....10x20 on both sets...
Now my updated order list looks like this....
5 220uF/25V P12383-ND EEU-FM1E221
2 470uF/35V P12415-ND EEU-FM1V471
2 1000uF/16V P12366-ND EEU-FM1C102
1 10uF/50V P11250-ND EEU-FC1H100
Nice catch... I once again bow to the geniuses...
Leave a comment:
-
Re: Need help DCLCD 19" LCD Monitor - I already replaced caps
As requested, I removed the caps and have them listed for verification. Ok, here's what I have for info. I'm posting a new picture, with number labels above each cap. first number is picture label, second is ps board part# third is capacitance fourth is voltage....
1 C33 220uF 25V
2 C72 220uF 25V
3 C14 220uF 25V
4 C13 470uF 35V
5 C11 470uF 35V
6 C33 220uF 25V
7 C12 1000uF 16V
8 C12 1000uF 16V
9 C33 220uF 25V
10 C7 10uF 50V...Last edited by Don P; 08-23-2011, 02:30 PM.Leave a comment:
-
Re: Need help DCLCD 19" LCD Monitor - I already replaced caps
Thank You both for your input on this... guess it's time to break out the soldering iron and see what I need... and where to find them... I think I saw a link somewhere here that recommended a good place to find them. I can solder, but to be truthful, I'm really appreciating your knowledge, especially in the area of good/marginal caps...Leave a comment:
-
Re: Need help DCLCD 19" LCD Monitor - I already replaced caps
Here is the top of the power supply board......Leave a comment:
-
Re: Need help DCLCD 19" LCD Monitor - I already replaced caps
Sorry about that.... here are 2 pictures. One of the signal board, the other is the bottom of the power supply board. I don't know why it won't let me load the third one, I'll post the top of the power supply in the next post......Leave a comment:
-
Re: Need help DCLCD 19" LCD Monitor - I already replaced caps
I looked through all the threads to try & find my problem, but no luck. So, here goes... My DCLCD 19" "died" a couple of days ago. I noticed that after coming back to it after a while, it would not "wake up". I tried pressing the power button, but that didn't work. What did work (a few times) was to unplug it and then plug it back in. Eventually, the entire screen would be white. That's all I get on it now. The other observation was that as I was plugging it back in, the front panel power...Leave a comment:
No activity results to display
Leave a comment: