Re: Westinghouse SK-32H240S Continued problems

That capacitor is 2200 uf and 10v I replaced this one too, but the new one is too big for the heat sink bridge plate now and there isn't space to lay it on its side. sorry haven't been on since Nov. busy Christmas season.

Re: Vizio VW26LHDTV20F Power Board Failure

Thank you for all your help as I am now using it.

I have been working on a 32" Westinghouse TV and so far I have replaced the inverter transformer and some of the badcaps that I found.

What is unusual is that after replacing the bad components the TV still won't work. When I turn it on it shows the logo then goes black, then, if I leave it on the picture will show up for a second, then goes black again.

The capacitors I replaced may not be the right ESR or ripple current rating.

The old caps were CapXons and the two I replaced were a 2200uF 10v GF 105 C P733 VENT, and a KY 16 v 1000uF (M)105 C...

Re: Vizio VW26LHDTV20F Power Board Failure

R1 is fractured and the transistor is being order but i yet have to identify the value of the resistor in R113

Re: Vizio VW26LHDTV20F Power Board Failure

Will the testing of the transformer be a logical step to finding the faulty componenets if not what else should i test?

I have a 26" Vizio LCD and have found blown parts and they are; the, what i am going to call a diode, but may be something else, in position Q1, Resistor in position R1, and another resistor in position R113 underneath the big electrolitic capacitor.

The board numbers are:9MN1261AFC0TN3LF, HIPRO HP-N1261A201 LF REV: 02, and 2007.11.07

It appears that either one of the resistors blew and took the diode with it, or the diode blew taking the resistor with it.

In the pictures, the tranformer and the diode heat sink are pulled out along with the burned...