toshiba e45-b4100 not detecting only detect hdd and while power on tickling sound heard tik tik tik tik
after testing ssd buses and voltage nothing strange all is normal , i try naother bios files and still with the same issue .
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
toshiba e45-b4100 not detecting ssd problem
-
toshiba e45-b4100 ssd problem
please help toshiba laptop not detecting SSD at all
after physical test it seems every thing is normal and 3.3 ,5.5 volt appears upon power but not detected in bios (drive none)
-
Re: A1932 boot problem
1) What is the history of the battery ? Is it a known good battery ? no idea i don't have original battery for test
2) Is the logic board # 820-01521-a ? yes
3) See attached. i check them already dear have good value...
-
Re: A1932 boot problem
i try diagnostic and all is okay except battery not detected
you mean if mac powered on without battery then it will not works properly
and it will have slow performance...
Leave a comment:
-
Re: A1932 boot problem
i measure these lines and positive line all is okay ,knowing that without battery laptop have slow performance...
Leave a comment:
-
Re: A1932 boot problem
mac is not reading battery and when i plug it gives battery not charging...
Leave a comment:
-
Re: A1932 boot problem
i have the same issue all is okay and booting normally but to slow performance
i try diagnostic and get noting all is okay
i try replace charging ic since my mac is not charging battery and give this notification in os (battery not charging)
ant suggestion .
thanks in advanced...
Leave a comment:
-
ds-7732ni-k4 hikvision
i have this nvr need to reset pattern and password any help i buy it used and it is locked
-
Re: Tp.v56.pb801
thank you dear , power problem solved som how but know have another problem it power one for 1 second give logo then goes black screen but ligt still green...
Leave a comment:
-
Re: Tp.v56.pb801
below you can find whole pcb picture with missing and burnt parts marked...
Leave a comment:
-
Tp.v56.pb801
hello please if any one have like this board please send me missing parts details and values to repair my board , since some one try to repair and didn't solder back damaged parts.
thx....
-
Re: dell cedar intel mb 13269-1 wont turn on
hello please can you help me i have same motherboard no power
after measurements i have 3.3v and 5.0v
psl-in2 which is 3.3 power button founded
kbc-aux-3.3 also founded
rtc voltage not founded
any advice
knowing that i already replace io and this io is not programmable...
Leave a comment:
No activity results to display
Show More
Leave a comment: