hi guys I ve been working on this card with weird symptoms and i can t spot a faulty componant .
The card powers on somtimes showing the bios screen , but somtimes it is not even detected the fan doesn t spin on both cases , i mesured the voltage on the 2 pin fan wires .
On one end it is reading 12v and on the other it gives also a voltage 10v wish is weird and it turned out that this is the only hint i ve got on what is wrong about this card
I found a schematic for a two wire fan for the gtx 750 wish is similar to mine
there s no gnd on the second pin , and the...

Re: Are these output caps supposed to be shorted on a Zotac 1050 ti

Ok
So 1ohm or less should measure in vcore .
and i ll check the 12v rail
but you know the graphic card gives a picture somtimes with fans not turning but once turned off ,it dosn't power anymore .

Re: Are these output caps supposed to be shorted on a Zotac 1050 ti

Thanx bozog for the reply
The vcore resistance are 1k ohm or just 1ohm?
If it is 1ohm it means that the beeping from my multimetre diode mode is normal, i should test the resistance in ohm mode.
I tested the mosfets in circuit , but only the gates in relation to the source not from source to drain or vice versa.

HI guys
Am currently troubleshooting this zotac 1050 ti , I' ve noticed that the output capacitor are shorted none of the mosfet seems to be shorted supposing i tested them correctly am new to gpu mobo repair
thanx in advance
...

Re: New Members - please post your introductions here

Hi everyone Greeting from morroco
Am new here , I d like to persue my learning path ,not only by reading threads and electronic article online but also interact with real Professional guys to exchange knowladge .let the the journey begin i ll set sail .