khuramg
Member
Last Activity: 03-30-2025, 02:30 PM
Joined: 03-03-2022
Location: Bradford
-
can anyone help, please? -
Many Thanks....definitely a change in board behaviour but still not working. The board appears to be functioning properly based on my power bench supply. It powers up, restarts a few times, and then draws the right amount of current, stabilising at just under 2 amps. However, there’s no display or keyboard light. The CPU and GPU heat up, so everything seems to be working, but it's not. Could this still be a BIOS issue, or is there something else going on?...Leave a comment:
-
Can someone help me check/clean this bios, please. The board powers up but there is no display or caps light etc. The white power led on the power button keeps blinking.
Model - Legion Y7000 2019 1050...Leave a comment:
-
Can someone help me check/clean this bios, please. The board powers up but there is no display or caps light etc. The white power led on the power button keeps blinking.
Model - Legion Y7000 2019 1050Leave a comment:
-
Amazing - thank you!!Leave a comment:
-
Thank you - downloaded bios.exe from Lenovo website and managed to extract the rom/bin from it - as your post suggested my backup file is 16,384 and the extracted file is 17,788 - now just trying to get my head around how to trim it with help of old backup file
thanks again
Leave a comment:
-
Absolutely amazing - programmed the file and boom, it works! Many Thanks!!! I've been trying to teach myself all day today regarding how to clean the file and copy AMI data from the backup file to no avail. If you don't mind, can you please point me in the right direction regarding how you went about creating this file, it would be much appreciated. Once again, thanks very much, the file works and and i no longer have a motherboard that is power cycling
...
Leave a comment:
-
I'm really sorry about that. I was aware of the rules but sadly I do not have all the required information. I came across this board in a job lot hence have very little information apart from what's printed on the pcb. Please remove if it's not allowed....Leave a comment:
-
I have NB8606-MB-V4 motherboard - i believe it is for (Lenovo IdeaPad S540-15IWL). When connected to PSU it draws current up to 400ma and then drops back down.....cpu gets hot for a short while and then the board recycles. i believe the bios is corrupted. I tried flashing a clean bios from this page and tried to copy the DMI info but the board does not power on at all...power draw remains at 20ma.
With the original bios it power recycles. Can someone take a look at the bios for me please and try to fix it? Many Thanks (old bios dump attached) - Many Thanks...Leave a comment:
-
Re: MSI GF65 Thin 9sexr Laptop RTX 2060 not detected on cold boot
anybody has any ideas or can help with schematics for this board? thanksLeave a comment:
-
Schematic for MSI GF65 Thin 9sexr MSI-16W11
Can anybody help with Broadview and/or Schematic for MSI-16W11 please. Thanks -
MSI GF65 Thin 9sexr Laptop RTX 2060 not detected on cold boot
I have an extremely weird problem I'm trying to diagnose on a MSI GF65 Thin 9sexr Laptop (motherboard ms-16w1).
The graphics card on the laptop RTX2060 is not detected on a cold boot.
If I turn the laptop off and then on again, it's there and works 100% for hours. I can even restart the laptop and as long as the laptop remains fairly warm, it will work.
Definitely a hardware problem as I've tried all software fixes and bios re-flashing (bios, firmware and vbios.
When the GPU does not work, the power to the GPU core it not present.... -
Re: New Members - please post your introductions here
Hello All,
Just joined this awesome forum.
I'm a hobbyist and absolutely love repairing electronics - computers, gpu's, laptops etc...
Looking forward to learning from experienced members and hopefully contributing to the community.Leave a comment:
No activity results to display
Leave a comment: