Re: Gigabyte GTX 1070 G1, Now PWM control nor leds nor Voltage readings in windows
Ok, so I have changed HOLTEK mcu and now voltage reads are ok, led GIGABYTE is working but fan stop is not. and again I have PWM fan control, BUT Watts are not, thus TDP is not, and it still gets 93ºC.
I have checked a couple of resistor too high and changed them but same results. I have attached a capture of GPU-Z.
As TDP is not reached, (still thinking of a sense resistor, but which one?) I suppose GPU is eating more power, until it hits thermal wall, put it does not...
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Gigabyte GTX 1070 G1, Now PWM control nor leds nor Voltage readings in windows
Hi, This is my first post asking for help. Most of the time I get the answer reading some other questions, but...I have some curious situation. I have a GTX 1070 from Gigabyte, If needed I have the schematics, but, I think I got it from here, but if someone needs it, please ask and will share.
The problem is that although it works fine, and gets high pfs when performing, temps goes Up to 94ºC~96ºC and fans does not spin.
list of what I have checked:
* Even if fans are at 100%, (fan pwm cable disconnected) temps are 94ºC~96ºC.
* Afterburner,...
No activity results to display
Show More
Leave a comment: