Hi. Thank You so much. You save my life ;-)
God Bless You...
Chris-H
New Member
Last Activity: 04-05-2025, 03:58 PM
Joined: 01-31-2022
Location: Przemyśl
-
Thank You, All good people.
God bless You...Leave a comment:
-
God Bless You. Thanks bro...Leave a comment:
-
Re: Acer VX5-591G C5PM2 MB LA-E361P Schematic
Thank You very, very much! :-))Leave a comment:
-
Re: RT809H ISP programming for laptop bios.
Hi
Desoldering bios chip, in my opinion, is the best option. You connect only "this one" and You read/write software directly from/to this one.
RT809H is very good and useful for programming not only KBC and bios chips (ChipProg-481 seems too), but for effective work - desolder "it" :-))
CH341A programmer offers "on-line" programming bios chips too, but sometimes what You
see is not what You want when connected to the mainboard.
Good luckLeave a comment:
-
Re: GTX 750 HDMI output not working
Hi
In case of HDMI problem important is +5V on pin 18 of this socket, when monitor and laptop (or PC) are connected . If it less then +5V (for example +3,3V like I had in laptop) HDMI is not working. I allways starts repair HDMI checking this value.
I don't know what exactly can be wrong with Your GTX card, but maybe this post will help somebody else.
Have A Good DayLeave a comment:
-
Re: Acer e5 573g DA0ZRTMB6D0 Bios Needed.
Thank You very muchLeave a comment:
-
Re: Useful Schematic component Code for Laptop
Thanks a lot. I missed that and now I have it. Have a good day.Leave a comment:
-
Re: New Members - please post your introductions here
Hello Everybody
I am Chris ( Krzysztof) from Poland. I "rummage" in electronics and
sometimes in software.
Please forgive me my linguistic mistakes - I'll try to do my best :-)) to be ok.
Best regards for All
Chris-HLeave a comment:
No activity results to display
Leave a comment: