User Profile

Tommes replied to Telefunken D43F287N4CWII - Vestel 17MB110S - Recovery Firmware

in Troubleshooting TVs and Video Sources

01-09-2022, 05:51 AM
Re: Telefunken D43F287N4CWII - Vestel 17MB110S - Recovery Firmware

Thank you very much for your help all.
It has worked now

The problem was, I swapped 2 Telefunken remote controls and
the OK button on the other remote did not appear to be the correct signal
It has flashed it, but the TV goes on briefly and then goes off again.
I just connected it to a damaged panel for testing,
I will test again on a healthy panel and see what it shows.
Maybe the board is lost for ever

See more | Go to post
Leave a comment:
Tommes replied to Telefunken D43F287N4CWII - Vestel 17MB110S - Recovery Firmware

in Troubleshooting TVs and Video Sources

01-08-2022, 04:55 PM
Re: Telefunken D43F287N4CWII - Vestel 17MB110S - Recovery Firmware

The usb stick are 2GB and 8GB
I mean, i took one of them for core update on an other Vestel Telefunken TV
But I'll try it with another one

See more | Go to post
Leave a comment:
Tommes replied to Telefunken D43F287N4CWII - Vestel 17MB110S - Recovery Firmware

in Troubleshooting TVs and Video Sources

01-08-2022, 02:23 PM
Re: Telefunken D43F287N4CWII - Vestel 17MB110S - Recovery Firmware

Thank you very much for your files
I've tried to flash them.
The TV didn't flash the files

Press & hold OK -> Plug Power Cable in -> Power LED lights up 8x and USB Stick LED lights on too ...
Then the Power LED lights on permanently, the USB Stick LED light off
Not flashed

I think the mainboard is still not recoverable

(2 USB Sticks (FAT32), both USB Ports, both file archives tested)

See more | Go to post
Leave a comment:
Tommes replied to Telefunken D43F287N4CWII - Vestel 17MB110S - Recovery Firmware

in Troubleshooting TVs and Video Sources

01-08-2022, 07:05 AM
Re: Telefunken D43F287N4CWII - Vestel 17MB110S - Recovery Firmware

I did it some days ago, I cloned the SPI with CH341 & the Clip.
Writing worked well, but it didn't help, the board still didn't work.
I think, the TSOP48 Flash should be cloned/flashed, but I think
there is not Clip for TSOP48 to flash it.
I think. it must be unsoldered for flashing oder with some luck
with the recovery files and these files are my hope

See more | Go to post
Leave a comment:
Tommes replied to Telefunken D43F287N4CWII - Vestel 17MB110S - Recovery Firmware

in Troubleshooting TVs and Video Sources

01-08-2022, 04:06 AM
Re: Telefunken D43F287N4CWII - Vestel 17MB110S - Recovery Firmware

Oh, is there no recovery firmware available für the Vestel 110S ?

For the 110 and 110P i could find a '4-files-recovery' archive

See more | Go to post
Leave a comment:
Tommes started a topic Telefunken D43F287N4CWII - Vestel 17MB110S - Recovery Firmware

in Troubleshooting TVs and Video Sources

01-04-2022, 09:56 AM
Telefunken D43F287N4CWII - Vestel 17MB110S - Recovery Firmware

Hey Folks,

I'm searching for a Full Flash Recovery Software
for my Telefunken D43F287N4CWII

Mainboard Vestel 17MB110S
Panel: VES430UNDB-2D-N12
Productcode: 10119394

Does anyone know, where I can get it ?
Or is it possible, to extract it from a working mainboard ?

The Support Telefunken/Vestel GER couldn't help me.
The Vestel TR Support didn't answer my email.

History:
The main problem with my Telefunken D43F287N4CWII was,
it just goes out after a while, sometimes after a...

See more | Go to post
Tommes replied to New Members - please post your introductions here

in Announcements & Related News

01-04-2022, 09:03 AM
Re: New Members - please post your introductions here

Hi,
it's Tommes located in germany. I have a problem with my Telefunken TV and I hope, I can get to work well back, it has a vestel Hardware core

See more | Go to post
Leave a comment:

No activity results to display

Announcement

Profile Sidebar

Leave a comment:

Leave a comment:

Leave a comment:

Leave a comment:

Leave a comment:

Telefunken D43F287N4CWII - Vestel 17MB110S - Recovery Firmware

Leave a comment: