Re: another 50" Philips 50PFP5332D/37
I did a test i read about... said to unplug the logic board from the PS and if it stays powered on and no error code... it would be more or less the logic board....
i did the test... power supply is now not giving an error code... im guess the logic board
hauntfreaks
Member
Last Activity: 07-21-2011, 10:51 AM
Joined: 07-18-2011
Location:
-
Re: another 50" Philips 50PFP5332D/37
I never looked at the brand.... the more im researching its looking like it might be the logic control board
but i see them used for as little as $25
Leave a comment:
-
Re: another 50" Philips 50PFP5332D/37
yep a plasmaLeave a comment:
-
Re: another 50" Philips 50PFP5332D/37
only thing i can find (maybe) the code means : High beam current protection active ?
this is where im really lost what does that mean?Leave a comment:
-
Re: another 50" Philips 50PFP5332D/37
picked up the caps... installed.... still nothing.... LED on power supply still blinking 2 time pause repeat.... im at a lose now...Leave a comment:
-
Re: another 50" Philips 50PFP5332D/37
thanks for the help guys...... im in NJ so... that looks great... i have a local place in philly... 10mins from me im trying today..... ill keep you posted how i make out....Leave a comment:
-
Re: another 50" Philips 50PFP5332D/37
nah got the leads out.... i used desoldering wick... but the leads still ripped out...
there: 16mmx10mmLeave a comment:
-
Bad Caps?
well.... i got them out.... there was just enough room... should be fun getting the new ones in...
...Leave a comment:
-
Re: another 50" Philips 50PFP5332D/37
the only other markings i can see is VNA.... the rest is obstructed by the heat sink... i think if I work at it, I can maybe use a pair of forceps after its desoldered.....
thanks again I really appreciate all the helpLeave a comment:
-
Re: another 50" Philips 50PFP5332D/37
wow... thanks for the lightening fast reply.... man i dread getting to these
they are:
Samxon
25v 680uf
105cLeave a comment:
-
another 50" Philips 50PFP5332D/37
ok im another owner of a not powering up 50" Philips 50PFP5332D/37....I've done a search and havent found anyone that has followed thru with fixing this problem.... heres my problem
when I plug the TV in... i hear a relay click... then about 10 seconds I hear the replay click again... then on power supply the LED flashes 2 times slow then a pause, then it repeats....
ive inspected the caps and all the caps that are "easy" to see are flat , no bulging or leakage... but under one of the heat sinks there are two caps.. very hard to tell but might have...
No activity results to display
Leave a comment: