Re: hp 15-p214ne
i try this solution and searched a lot to solve this solution no sense
still the same problem ,any idea can have this solved...
Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: Fh52m la-j891p
yes you are right i also try but give error and reg 9 like this security...
Leave a comment:
-
Re: hp 15-p214ne
i didn't understand what i can do with these tools can you edit it for me please...
Leave a comment:
-
hp 15-p214ne
please i need help with this bios file some time gives display some times no
when it gives display it give bios unlock , the picture below shows strange error...
-
Goya/balen 1.0-ddr3 11254-3
i have this laptop with windows stuck problem and i have another baord ,
the second baord have green dots on screen while on external display no dots
i try another hdd and msata for first mb that have windows stuck issue nothing changed and the green dots i convert from uma to discrete still the same issue...
-
Gl553vd rev 2.0
kindly upload ec & bios file for this motherboard .
thanks in advanced
Leave a comment:
-
la-h321p rev 1.0
Please any one can upload EC file for la-h321p rev 1.0
thanks in advanced,
Leave a comment:
-
820-01814-a
please help
this MacBook came from another repair shop it was liquid damage not charging at all
after replacing charging ic and cleaning all water residue know it is charging and voltages for boot founded but it is not booting and storage ics is getting too hot...
-
Re: Predator PT315-52 Fh52m la-j891p
i try all these softwares no luck, know laptop just light up power bo=utton and turn off, before it was working and fan spinning ,keybaord light up, know no life...
Leave a comment:
-
Re: fy710/fy714 nm-c531 rev:2.0
Great dear friend can you help me to solve this problem...
Leave a comment:
-
Re: fy710/fy714 nm-c531 rev:2.0
3.3v alw resistance value 0.335 diode mode
5.5v resistance value 0.435 diode mode
resistance on pin 8 0.670 diode mode
all measurements done with red probe on gnd...
Leave a comment:
-
fy710/fy714 nm-c531 rev:2.0
this mbo while plug on charger with battery when pressing power button white led light blinking and no power
after basic measurements i get 3.3 and 5.0 volt for power system and 1volt coil near pch , pch get littlie warm but no power
any idea to solve this problem thanks
-
Re: gl553vd
1v0 have 1.0 volt and resistnace is 0.064(diode mode red on gnd)
3v3 have 3.3 volt and resistance is 0.121(diode mode red on gnd)
in ohm 1v0 have37.5ohm and 3v3 have 247 ohm
notice super i/o on thermal cam have normal temp 24 degree...
Leave a comment:
-
Dk10fg-6050a2509901-mb-a02
THIS LPAOTP WORKS AND AFTER A WHILE IT TUNRS OFF ALONE.
AFTER VOLATAGE TEST ALL IS OKAY
any idea it may be overheating problem knowing that i cleaned heat sink and fan and new thermal past applied .
DK10FG-6050A2509901-MB-A02 this is mother board number
-
Re: gl553vd
q8801
5,6,7,8 =19v
4=24v
1,2,3=19v
q8802
123=19v
5,6,7,8,=19
4=24v...
Leave a comment:
-
Re: gl553vd
please can you point me to the testing pins so that i can measure...
Leave a comment:
-
Re: gl553vd
the voltage on pin 1 is 19 volt and on pin number 6 is 2.4 volt
the laptop is 0.03 with battery and without battery and when press power button the white led light up but nothing on display...
Leave a comment:
-
Re: Predator PT315-52 Fh52m la-j891p
YES I'M USING CH341A ,IT IS ATTACHED IN THE POST ABOVE
[url]https://www.badcaps.net/forum/attachment.php?attachmentid=254804[/url]Re: Predator PT315-52 Fh52m la-j891p...d=254804[/url]...
Leave a comment:
-
Da0lx6mb6h1 rev h
Any one can help please
this laptop can power on but wtihout display
3.3 and 5.0 founded but 3.3 on bios chip not found
knowing that it power on but no display
3.3 vdd generated by pch maybe pch damaged ???
No activity results to display
Show More
Leave a comment: