Re: LP2407 No Picture after replacing Caps

When it is turn one the Gateway chimes then Gateway logo then 20 sec into the power up of it the AUCUN signal with RGB appears then goes completely black. Nothing no light just black.


Thanks jsog for helping.

Do you or anyone else know what to go look at / test / measure?

Re: LP2407 No Picture after replacing Caps

The first time I plugged it in after replacing the caps the Logo & the menu on the right side appeared.

Now only the Logo appears and no menu.

Yes the cable is connected.

Any suggestion on what to look for?

Hello All,

I have replace all the caps in the monitor with Panasonic or Nichicon caps:

C618, C609, C501, C605, C611, C613, C601, C615, C506, C506, C227, C223, C619, C334, C505, C1, C3, C904, C901, C912, C902, C928, C929, C501, C608, C609, C611, C605, C615, C601, C613, C508, C334, C619, C223, C227, C505

The monitor is connected to a running comuter with and output signal.

When the monitor boots up the Gatway logo appears no blue light and no touch screen function.
Then the monitor goes black.

I need help into what...