Re: Samsung UN55ES6100F power board output voltages ?

Yes, saw that on the rear of the board, but didn't know about the led circuit being disabled if led strip is "open"...

Thank-you very much for your help sir !

Re: Samsung UN55ES6100F power board output voltages ?

Hi, thanks for your reply...

Ok, understood, I have over 300v CNL802 plugged or not,
so at least one of the led strips is open...
But should I get anything when I test pin 8/9 to 1/2 on the PSU (with the LED connector unplugged) ?
With schematics would have been easy to figure (wich I tried to find without success)

Hello everyone, I've searched the forum, got close on 1 thread but it was missing the info that I need...
The tv powers up with no backlight but it passes the flashlight test...
First, I've disconnected the mainboard from the power board (BN44-00503A), still no backlight. Before concluding on bad led strips, I wanted to check voltages at it's connector (CNL802):
Voltage on Pin 1 (or 2) to ground fluctuates from 299v to 321v but nothing between Pin 1 and Pin 9 ...
Shouldn't I read any voltage there ?
I ordered a LED tester online (dont want to dismantle...

Re: New Members - please post your introductions here

Hello everyone, hope all is fine despite the covid crazyness ?

Thank-you in advance for any help I will seek and for permitting me to join the group !