Re: surface pro 5 1796 flashes logo
Still nothing. Must be something more serious.
Logo flashes then goes off....
stevep2k21uk
Member
Last Activity: 03-03-2023, 03:59 AM
Joined: 11-30-2021
Location: BRADFORD
-
Re: surface pro 5 1796 flashes logo
[ATTACH]290588[/ATTACH]
errors from test2Re: surface pro 5 1796 flashes logo
[ATTACH]290588[/ATTACH]
errors from test2...Leave a comment:
-
Re: surface pro 5 1796 flashes logo
when i check it with me analyser it gives crc errors? should i still try it?...Leave a comment:
-
Re: surface pro 5 1796 flashes logo
screen just flashes on then goes off again like initial problem...Leave a comment:
-
Re: surface pro 5 1796 flashes logo
new screen fitted - tcon error has gone so must have been related to missing screen.
touch doesnt work though with new screen...Leave a comment:
-
Re: surface pro 5 1796 flashes logo
Hey smdflea
I have flashed it and the tablet boots but there’s a code 10 power failure on the TCon driver.
Any ideas?
Thank you for your helpLeave a comment:
-
Re: surface pro 5 1796 flashes logo
BumpLeave a comment:
-
Re: surface pro 5 1796 flashes logo
2 versions - original extracted bios and FIT output with new ME region
but still flashes logo so believe its something more that is corrupt,
if i change bios region i lose serial numbers etc,
[ATTACH]289652[/ATTACH]...Leave a comment:
-
Re: surface pro 5 1796 flashes logo
BumpLeave a comment:
-
Re: surface pro 5 1796 flashes logo
Anyone?Leave a comment:
-
Re: MS Surface no touchscreen after cleaning ME Firmware **FIX**
thanks, but can you confirm that in FIT the ish is set to NO?
how do i fix this...Leave a comment:
-
Re: surface pro 5 1796 flashes logo
BumpLeave a comment:
-
surface pro 5 1796 flashes logo
hi
i have a suface pro 1796 that flashes logo on boot then goes off,
i believe its a corrupt update, i have extracted the bios from the flash and it fails when i run ME analyser - CRC errors.
i have a working bios that has the same version and was wondering if there was anyone out there who could replace the ME in my file with the working one from the other?
(if this is possible!)
extract is my file
[ATTACH]289107[/ATTACH]
[ATTACH]289108[/ATTA...Leave a comment:
-
Re: MS Surface no touchscreen after cleaning ME Firmware **FIX**
[ATTACH]289015[/ATTACH]
[ATTACH]289016[/ATTACH]
if these two files were merged would this fix the problem?Re: MS Surface no touchscreen after cleaning ME Firmware **FIX**
[ATTACH]289015[/ATTACH]
[ATTACH]289016[/ATTACH]
if these two files were merged would this fix the problem?Re: MS Surface no touchscreen after cleaning ME Firmware **FIX**
[ATTACH]289015[/ATTACH]
[ATTACH]289016[/ATTACH]
if these two files were merged would this fix the problem...Leave a comment:
-
Re: MS Surface no touchscreen after cleaning ME Firmware **FIX**
[ATTACH]289011[/ATTACH]
this is my bios - FIT shows ish as yes.
i believe the ME is corruptRe: MS Surface no touchscreen after cleaning ME Firmware **FIX**
[ATTACH]289011[/ATTACH]
this is my bios - FIT shows ish as yes.
i believe the ME is corrupt...Leave a comment:
-
surface pro 6 1796 bios
i have a surface pro ****** that flashes logo when booting, i have extracted the bios from the chip
can anyone help diagnose problem?
MOD EDIT: Surface pro 6
. -
Re: Need UEFI Password Removed from my Surface Pro 5 BIOS DUMP
this is it,...Leave a comment:
-
Re: surface pro 5
further investigations brought me to where the password may be stored.
AWORD in the passworded file appear twice and only once in the unpassworded file - see attached
someone might be able to make a program to decode the password knowing that the password is "password"
i...Leave a comment:
-
surface pro 5
i have been trying to decode where the password is stored in my bios for surface pro 5
i dumped the bios then set a simple "password" then redumped it
theres definatley differences between the files,
maybe someone can help work out how to decode it, im sure it will help loads of people...Leave a comment:
-
Re: Surface Pro 5 bios dump
Will it make the touchscreen work though?...Leave a comment:
No activity results to display
Leave a comment: