Re: MSI GeForce GTX 970 Gaming 4G error 43.
Hello WayOfTheRoad.
Thank you
I'll check it out and if I find anything I come here to update the thread.
Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: MSI GeForce GTX 970 Gaming 4G error 43.
All ready done on my first post ...
Leave a comment:
-
Re: MSI GeForce GTX 970 Gaming 4G error 43.
Hello everyone.
The card has been mounted in an SLI system.
It worked randomly depending on the user.
It is possible that it suffered damage related to the SLI port or other (may be dead GPU ???).
If we forget about the missing pins, I would like to know if anyone has already dealt with the symptoms detailed in the photo (Attached Thumbnails).
No memory error with Mats.
No artifacts.
Normal HD 1080 resolution on my screen.
0 GB instead of 4 GB with GPU-Z
And finally error 43....
Leave a comment:
-
Re: MSI GeForce GTX 970 Gaming 4G error 43.
Hello WayOfTheRoad.
Thank you.
I want to clarify once again that the damage is on the SLI pins and not on the PCIE port.
To make sure we understand each other.
Regards.
Leave a comment:
-
Re: MSI GeForce GTX 970 Gaming 4G error 43.
Hello WayOfTheRoad.
Thank you for your reply.
i will try to fix those pin.
Any advice for this work ?
Did i need to scratch the board to restore the lines ?
Thanks.
Leave a comment:
-
Re: MSI GeForce GTX 970 Gaming 4G error 43.
Hello diif.
Thank you for your reply.
Unfortunately, I admit that I do not fully understand it.
You asked me to compare with a pin of the PCI-Express 16x port?
If I read the diagram correctly the two missing golden fingers are MIOA_RASTER_SYNC1 and MIOA_CLKOUT.
So as not to waste your time, in your experience is this fault repairable?
Thanks for your help.
Leave a comment:
-
MSI GeForce GTX 970 Gaming 4G error 43.
Hello everyone.
I am asking for your help in diagnosing an MSI GeForce GTX 970 Gaming 4G (V316 1.1).
It displays error code 43 and 0 MB under GPU-Z.
No artifacts and 0 errors with MATS.
It starts up normally, the resolution is normal.
I can flash the bios, but it doesn't change a thing.
Visual fault on the SLI port.
Thank you....
No activity results to display
Show More
Leave a comment: