Re: Can anyone identify these caps?
Thanks for the tip, but I don't have that PSU here.
I'm just trying to find out of which quality be quiet PSUs are.
justusjonas
Member
Last Activity: 11-22-2011, 11:19 AM
Joined: 06-26-2011
Location:
-
Re: Can anyone identify these caps?
Yes, but which one exactly? I need some kind of datasheet for them (impedance, ripple current, ...)Leave a comment:
-
Can anyone identify these caps?
I'm wondering what kind of caps be quiet is using in their PSUs.
I've been unable to find some good shots where I can read some product code or smiliar, that's why I'm asking if anyone of you can identify the caps shown on the attached photos.
All I know is some are OST, some are Teapo.... -
Re: Help with K8N Neo4 Platinum
Thank you so much! You guys are great!
Didn't know it's that hard to find good replacement caps...
I went with the MCZ caps from ebay.
All the smaller caps on the board are rated 105°C and the other caps inside the VRM area are Panasonic so I should be fine by replacing those KZGs with the MCZs.Leave a comment:
-
Re: Help with K8N Neo4 Platinum
And I have to pay 20€ per order for shipping etc... Way too much for just four caps
That's bad... wondering why they are selling FCs as replacement for KZGs. Anyway, they also have new KZGs but the ones they are selling have 1800uF. Would that be a problem?...Leave a comment:
-
Re: Help with K8N Neo4 Platinum
Then I got lucky, the Nichicons are from 2005. So looks like I only have to replace those KZG...
Yes but the Nichicons on my board are not in critical areas (like VRM), so maybe they could fail without me even noticing.
I'm from Germany, so I would take these to replace the KZG:
[url]http://www.elko-verkauf.de/de/shop-bereich/8-elkos-16v/66-elko-1500uf-16v-10mm.html[/url]
=> Panasonic FC. Should be fine, too?!Re: Help with K8N Neo4 Platinum<br /...<br /> Then I...Leave a comment:
-
Help with K8N Neo4 Platinum
Hi,
I have a K8N Neo4 Platinum here, which is running fine (24/7 with 100% cpu load...), but looking rather bad.
Have a look at the attached photos, I think the KZG have definitely failed. That would be 4 caps to replace.
But what about the other caps? The Panasonic ones are also inside the VRM area but they are looking good as far as I can tell.
Then there are some more caps like Nichicon and KZE spread around the rest of the board. Any problems with them?...
No activity results to display
Leave a comment: