Thanks Ghamidi, I imported new Bin file that you attached, It turned on
I hope the sleep-wakeup problem is solved. I will work with it and update the result here....
Maya.S
Member
Last Activity: 05-14-2022, 08:35 AM
Joined: 10-09-2021
Location: San Diego
-
Re: Apple Macbook Pro A1278 BIOS Dump
Thanks Ghamidi, I imported new Bin file that you attached, It turned on I hope the sleep-wakeup problem is solved. I will work with it and update the result here....
-
Re: Apple Macbook Pro A1278 BIOS Dump
thank you Peste, I have a quick question. My MacBook is early 2011 I was forgot my bios password and ordered a new chip from Ebay I soldered on board, password cleared but I have a EFI sleep wakeup problem, fan spin very fast but won't turn ON, Sometimes I tried to reset the SMC but only 2 or 3 times was successful this method.
I import your bin file into the Ebay's chip, but nothing happened. (Won't turn ON, Fan spin very fast)
any Solution?
Thanks,...Leave a comment:
-
Re: Apple Macbook Pro A1278 BIOS Dump
I extracted this bin file from my EFI chip, Thank you!...Leave a comment:
-
Re: Apple Macbook Pro A1278 BIOS Dump
Hi, I need Bios Dump for [COLOR="Red"]A1278[/COLOR], [COLOR="red"]820-2936-B[/COLOR] EMC-[COLOR="red"]2419[/COLOR] Thank you!Re: Apple Macbook Pro A1278 BIOS Dump
Hi, I need Bios Dump for [COLOR="Red"]A1278[/COLOR], [COLOR="red"]820-2936-B[/COLOR] EMC-[COLOR="red"]2419[/COLOR] Thank you!Re: Apple Macbook Pro A1278 BIOS Dump
Hi, I need Bios Dump for [COLOR="Red"]A1278[/COLOR], [COLOR="red"]820-2936-B[/COLOR] EMC-[COLOR="red"]2419[/COLOR]Leave a comment:
-
Re: Macbook pro 820-2936-b a1278 bios dump
Could you tell me what the programmer you ordered please?
CH341A with what adapter or anything else?...Leave a comment:
-
Re: Macbook pro 820-2936-b a1278 bios dump
Hi, I have a quick question, I forget my EFI password, and the model of my MacBook is (820-2936-B EMC-2419) Can I reprogram it with this BIN file? Thanks.
Because I ordered a reprogram EFI same my model from Ebay, after I replace with my chip the password removed but I have a sleep wakeup problem with this EFI. every time I have to do reset SMC.Last edited by Maya.S; 04-09-2022, 02:50 PM.Leave a comment:
-
Re: Samsung's TV bad SMD led
Thanks, Diif, yes, I saw some LED strip and the price was much more than this one and I think this price is reasonable. Thanks,
I also thank the others for their guidance....Leave a comment:
-
Samsung's UN40H5203 TV bad SMD led
Hi, I have a Samsung TV 40-inch UN40H5203
I want to replace the dead SMDs led with a new one, but because of the cost I don't want to buy the full strip and I know they may die again. So, could you guide me, what model of led SMDs should I order? Thank you!... -
Re: MSI HD 7850 Twin Frozr III Capacitor burned
Yes, I have air gun solder, one stupid question, Can I remove up cover and VGA Fans and put 2 fans from old motherboards and put on it and plug to mainboard socket? :-)...Leave a comment:
-
MSI HD 7850 Twin Frozr III Capacitor burned
Hi,
I don't know if here is right category where I'm asking.
My graphic card's FAN cable was problem it was my wrong that 2 wires of fan touched together and soddenly I saw the flash where one of the capacitors burned.
*I tested Graphic Card works fine, but Fan doesn't work at all. I think the capacitor was for fan's power
I want to order new replacement could you guide me what type of capacitor should I order?
Thank you,...Last edited by Maya.S; 01-31-2022, 01:50 PM. -
Re: Sharp Aquos LC-70LE732U Blinking Pattern 2 -5
My Sharp LC-70UD1U Screen is black and flashing, "I attached the video"
Well, I opened the back cover and as you can see in the picture, I detached 2 [L] Ribbon then TV turned ON, but detached side is white and attached side is normal
* When I attached [L] side Is goes to error code 2-5 blinking.
* I attached two [R] ribbon alone, but it goes to error code 2-5 blinking.
Does anyone have any solution?
[url]https://youtu.be/JOXMDMceFhU[/url]
[url]https://flic.kr/p/2mXXbTH[/url]...Leave a comment:
No activity results to display
Leave a comment: