Re: Trouble ID'ing C3 Cap.

Thanks everyone. This gives me some guidance. I haven’t de soldered and removed the unit yet. As suggested, it may be labeled on the side I can’t see as it’s mounted horizontally and only exposes the upper top portion. I failed to mention, it is a Lelon. Many thanks again.

This is a Jenn Air stove model # JMW8527 AAW. NO clock or temp. light.
Disassembled and can see burn spot on one leg of the C3 cap. at the board hole. There is a resistor on that leg also. Only markings on the cap are: RGA105C and H245M. Can't seem to I'D as to the it's capacitance or voltage in order to order a new one. Any help would be greatly appreciated.

Re: New Members - please post your introductions here

Glad to be here. Am interested in improving my knowledge
=petabyte;27]As this is a brand new forum, I thought I'd open up a thread to encourage new members to introduce themselves a bit.. now hey.. let's not get [b]too[/b] personal.. ok ?

And if you wouldn't mind to keep this thread "clean" let's try to keep the the chitchat (i.e. even the welcome to the board replies) to a minimum or this thread may get to 100 pages fast

So I'll start things off :

...