Re: Dell E196FPf all white after recap

uploaded the pictures to this post.

Rtech,
i just checked the D-Sub cable again, and working fine on a good monitor.

PCBONEZ,
i understood that i can put up to double of the original caps, so i took those caps from an old MoBo, thought they will be fine. should i order new caps from ebay? i read here that it's not that good to recap a lot of times... afraid to damage the PCB......

Re: Lite-on R17AA "No Signal Input"

i couldn't find how to edit my first post so i uploaded the pictures to this post.

Rtech,
the monitor was dead before the recap. only after the recap i got the "no sifnal" message.
i checked all the plugs. tried to pull them out and plug them in again, everything sits fine.
sorry about the pictures, i uploaded them again now.

PCBONEZ,
the brand of the original caps were capXon so i replaced them with new Radial Electrolytic caps found on [URL="http://cgi.ebay.com/10V-1000uF-Radial-Electrolytic-Capacitors-105a-f-5pcs-/110672515205?pt=LH_DefaultDomain_0&hash=item19c4989085"]eBay...

Hi,

i have a Dell E196FPf monitor that showed a very "low light" picture.
i mean that i had to turn off all the lights in my room to hardly see what's on the screen.
so i opened it and saw 2 220uF 25V bad cap's, i replaced them with 2 330uF 25V caps (this is what i had and i understood that i can replace the 220uF caps with up to 440uF caps with same Voltage).
after that, i turned it on and all the screen is white, the light is ok, but white screen is all what i got.

what should i check more?

here's some pictures of the...

Hi,

I have a Lite-on R17AA monitor that was not working at all.
after replacing 2 cap's that looked damaged to me, the monitor came back to life, but sais "No Signal Input".
what should i check more? i really want to learn how to fix it

here's the old cap's near the new cap's that i ordered:
[url=http://www.picvalley.net/v.php?p=u/1857/8222857481818918721306271843m3nDLtVSseOhlBY5vtGm.JPG][/url]

[url=http://www.picvalley.net/v.php?p=u/1527/3400324122677176491306271866DiEQ5URfe6navNcGQiLQ.JPG][/url]

here's the

Re: New Members - please post your introductions here

Hey everybody,

I'm Oren from Israel, 28yo, found this great board through Google, while searched for a solution to my E196FPf monitor that suddenly stopped working.
I prefer to fix what i can at home by myself, it's my hobby and i produce much pleasure doing it (save's a lot of money, too $$$ )
I really exited to find this board because it seems that there's a lot to learn here.
I have 2 "dead" monitors that i like to fix (tried to fix them by replacing capacitors but still...