Re: Samsung le40r88bd Clicking, All caps tested ok



I just wanted to add my experience to help others
I had this clicking sound, led blinking problem on a,LE40R86BDX. One cap was bulged, i have changed it but the relay was still clicking. I have changed all the nearby caps but still no change. Then i have reset the eeprom as suggested and its working! But it is very important to enter the factory menu and perform reset and setup there because until i did it it was reverting back to clicking after unplugging and plugging in to mains again.

So...

Re: Samsung LE40F86BDX (model 2007) noise in picture



And which board? Main or FRC or T-CON? or all of them? Thanks for the reply ...

Hi

I have this TV bought back in 2007 and used it for playing on PS3 for 4-5 years actively. After then it was barely used. It was mostly in stand-by mode or plugged out of mains completely for years. Today when i turned it on i have noticed noise in picture on two different locations of the screen. As you can see on the photos (see attachments) the noise is only in a small rectangle area, and if you look at it closely you see that one noise rectangle area is at the upper left corner of first half of screen, the other noise rectangle area is at the upper left corner of the second...

Re: New Members - please post your introductions here

Hi. My name is Zsolti Bitter and i am from Slovakia (but i have hungarian nationality). When i was younger i was more interested in electronics, since then it faded but sometimes i repair some electronics so we dont have to throw them away. a few weeks ago i have repaired a printer- it could ot print because of faulty sensor of black colour, even at full cartridge it showed empty cartridge, i managed to hack it by shorting the copper pads on the printhead. Now the priter is fully usable again. Now i am encountering problems with...