Re: Vizio GV 47L FHDTV10A picture rolls
Thanks everyone. I'm running it in HDMI 720p mode. It works but it does have artifacts.
siphilpot
IwasaUPSman
Last Activity: 05-30-2014, 07:46 PM
Joined: 06-07-2011
Location: Ocala, FL
-
Re: Vizio GV 47L FHDTV10A picture rolls
Shinju,
I did as you suggested, switched hdmi to 720p, that works much better. It still has problems, but as least it's viewable.
Thanks for the help.
SteveLeave a comment:
-
Re: Vizio GV 47L FHDTV10A picture rolls
10 sec video
[url]http://youtu.be/2CffMjw3mjI[/url]Re: Vizio GV 47L FHDTV10A picture ro...fMjw3mjI[/url]Leave a comment:
-
Re: Vizio GV 47L FHDTV10A picture rolls
When I turn on Dish the splash screen displays ok, then I get the other images. Can anybody help?
Thanks,
Steve...Leave a comment:
-
Vizio GV 47L FHDTV10A picture rolls
My Vizio GV 47L FHDTV10A in HDMI mode, displays two pictures overlapping, one rolls top to bottom, one stationary. When it started, it would roll once every 2-3 seconds and now does it constantly. If I change the input to AV or Componet and press menu on the Vizio remote, the menu displays properly. If I change the input to HDMI and press menu on the Vizio remote the menu also appears as two pictures as mentioned above. Is this caused by the
T-con board?
Thanks -
Vizio vp50hdtv20a plasma sound but no picture
Hello Guys:
I have a Vizio vp50hdtv20a plasma sound but no picture.
Voltages are as follows:
VOLTAGE VOLTAGE
SHOULD BE IS
Vs 207 207.7
Va 63 63.3
Vsc -190 -190
Ve 94 124? I'm not sure about the Ve test point.
I found two burnt resistors on the Ysus on left side next to the buffers.
I replaced the Ysus, on power up the same two resistors become VERY hot. I...
No activity results to display
Leave a comment: