Re: Led panel removal
My technique is with fine fishing line (0.25 mm). Take the thread from both ends and begin to slide it under the screen, from top to bottom, starting from one of the angles. Be careful with the panel's flat flex cables.
WILSON_RD
New Member
Last Activity: 11-24-2021, 07:17 PM
Joined: 08-10-2021
Location: Caaguazu
-
Re: Samsung UN49K5300AG, BN44-00868A L55PF_KDY
Dear R_J,
I will wait for my package with the led strips, I will connect them and then I will comment on the result. Now I feel more secure.
Thanks for your help....Leave a comment:
-
Re: Samsung UN49K5300AG, BN44-00868A L55PF_KDY
Sure enough, dick_barton. I accessed the LEDs and one of the two strips of 31 LEDs each contained 8 burns. These go in series.
My biggest fear is that when energized they will burn again from the high voltage. Considering that I must buy it online and it takes a little more than a month to reach its destination. : o:...Leave a comment:
-
Samsung UN49K5300AG, BN44-00868A L55PF_KDY
Hello.
I need the BN44-00868A L55PF_KDY voltage source diagram.
If anyone has, I would be very grateful if you share with me.
The problem with this circuit is that a very high voltage comes out in the backlight (300 v. The LEDs burn), It should be only 119 v.
I suspect the IC Driver (IC9851) is leaking, but I can't get the datasheet. Its characteristic is '70152' with eight pins.
Hope someone helps me with this. Thanks.... -
Re: New Members - please post your introductions here
Hola amigos;
Soy Wilson, técnico electrónico y electricista. Me gusta compartir experiencias con colegas y amigos.
Gracias.Leave a comment:
No activity results to display
Leave a comment: