Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Samsung un60d6000-led strips
I have removed the display panel on this set. I have two side LED strips on each side of the tv. When I power on the set the LEDs cycle on and off. Half the LEDs are out on each of the 4 strips-2 per side. Seems unlikely the problem is the high voltage section as it seems like a dual symmetrical configuration on the board. LEDs ?
-
Re: Testing side panel led strips
looks like half the LEDs are out on each of the 4 strips.
-
Testing side panel led strips
I have a Samsung tv that has the LED strips on the side of the tv frame. There are 2 strips per side, each strip has a 4 wire plug. How do you or can you test these strips with a standard LED tester.
-
Re: Led panel removal
Thanks ,about the best idea I have come across
Leave a comment:
-
Led panel removal
Can you use a moderate amount of heat to remove a LED panel if its stuck. It seems the felt pads on the frame under the panel have stuck to the screen preventing east removal
-
Re: Samsung UN60D6000SF P/S BN44-00425A
Initially when there was no turn on did the back lights flash on and than off repeatedly ?
Leave a comment:
-
Re: SAMSUNG UN60D-removing LED panel
Thank you ! very good advice
Leave a comment:
-
SAMSUNG UN60D-removing LED panel
Hello, I am repairing a 60 inch Samsung. I have removed the bezel and aluminum frame that goes around the perimeter of the LED panel. I have suction cups. I can not remove the panel its stuck. I have removed panels several times before and they just lift out. Any one have any advice?
Thanks
J
-
Re: New Members - please post your introductions here
Hello , First transistor radio I received when I was 7 ...... took it apart after 3 days.
J
Leave a comment:
No activity results to display
Show More
Leave a comment: