Re: LC-55P6000U Backlight Working no Picture
Hey so I believe I checked all the caps on the driver board and didn't find any shorts :/
I'm gonna check again tonight to double check, but I don't see any diodes on the driver board or the t-con board?
richstv
New Member
Last Activity: 08-11-2021, 11:59 AM
Joined: 08-05-2021
Location: Cocoa
-
Re: LC-55P6000U Backlight Working no Picture
Okay so I may have found the short but I'm not entirely sure
In this video:
[url]https://youtu.be/DSScwnoj4vM[/url]
I'm using the setting that makes a noise when it detects a short I believe, and the component I am analyzing sets off the voltmeter (the voltmeter reads 0). But when I switch the voltmeter to the 200M setting and read the component I get a 0.9 reading, so I'm unsure if this is a short?
Is the component I'm checking even a cap or is it a resistor? In the first...Leave a comment:
-
Re: LC-55P6000U Backlight Working no Picture
Hey sorry so I guess I'm more clueless than I thought
when checking for the short on the caps should the TV be on? Also what setting on the voltmeter should I use and what kind of reading should I look out for (am I expecting 0)?...
Leave a comment:
-
Re: LC-55P6000U Backlight Working no Picture
No problem I understand now thanks for clarifying!
...
Leave a comment:
-
Re: LC-55P6000U Backlight Working no Picture
Sorry about that the manufacturer is 'Sharp'. What do you mean by bevel board? Would that be what I referred to as the driver board?...Leave a comment:
-
Re: LC-55P6000U Backlight Working no Picture
Thanks for the response I'll be trying this soon! Still need to buy a multimeter and some other gear
Just to be clear what exactly do you mean by releasing it?...
Leave a comment:
-
Re: LC-55P6000U Backlight Working no Picture
[url]https://youtu.be/MDWxMEs9eHw[/url]Re: LC-55P6000U Backlight Working no...xMEs9eHw[/url]Leave a comment:
-
LC-55P6000U Backlight Working no Picture
Hi guys I'm new here! Found out about the site on youtube after doing a bit of research to help me fix my tv.
So my issue seems to be somewhere on either the t-con board or the driver board. I know this because when disconnecting the right side pin connectors from the t-con board I get half of the tv to work. When I plug the right side back into the t-con board and unplug the left and turn the tv on, I see some light come to the same half of the tv and it fades into just a black screen (with the backlight still on).
What can/should I do to further troubleshoot? Is... -
Re: New Members - please post your introductions here
Ay I'm new hi!Leave a comment:
No activity results to display
Leave a comment: