Re: KSGER 2.1S Solder station Capacitor question - Temp rating

I grabbed (4) of the Panasonics. I'll report back. Thanks all.

Re: KSGER 2.1S Solder station Capacitor question - Temp rating

Thanks. Looks like the Panasonic FS series is the ticket. I’ll grab some.

Re: KSGER 2.1S Solder station Capacitor question - Temp rating

Oh no......

Thanks. The 400V 82uf has a low ESR rating. The 1000 uf ones don't have any ESR rating. Part number is 35PK1000MEFCCE10X20.

Back to the drawing board on these. These 1000uf 35 V caps in a 10mm X 20mm package are hard to find.

Appreciate the response.

EDIT: I do have some Sanyo 1000uf 35V Low ESR capacitors in the right size package. I may just stick with these if I can't find a Rubycon or Nichicon in the right size. I'm sure these are still better than the...

Hi all,

I have a spare power supply board and want to replace the three main caps. The 400V 82uf and the two 1000uf 35v caps. I have a Nichicon 400V 82uf cap at 105C (o issue with these) and two Rubycon caps at 1000uf 35v, however, these two are 85C caps. The ones on the board (even though junk caps) are rated at 105C. Could I use the 85C Rubycons in this unit?

Thanks for any insight. I posted this on the eevBlog forum also.

Re: 3d printed electronics bench accessories and equipment

As the OP stated, I printed several items from thingiverse for small parts storage (resistors, diodes, etc.) They work great.

Re: New Members - please post your introductions here

Hi All! My name is Todd and I'm 51. Retired Submariner in the US Navy. I am currently a Service Engineer at a large HVAC Company. I do a lot of electronic guitar repair, effect pedals, etc. Looking to learn.