Re: AKAI LCT2715 LCTV no sound
Yes budm I did check the audio menu, and it is set to On. I found out what was the problem. The cable in pic 1 was attach to the same board when it was meant to go
onto the main board. Fix that & now I have sound.
Thank You
SURFER7
New Member
Last Activity: 01-08-2023, 04:47 PM
Joined: 05-21-2011
Location:
-
AKAI LCT2715 LCTV no sound
Hello, I'm Sam
Need help on a AKAI LCT2715 lctv I've found. Turn on the tv, no picture or sound, just a red blinking light.
Open up the unit and found some bad caps. Replaced bad caps & retested the tv. Now I get signals but
no sound. Hope this the right place for this. Will upload some pic if I can.
Thank You.... -
Re: New Members - please post your introductions here
Hello, I'm Sam
Need help on a AKAI LCT2715 lctv I've found. Turn on the tv, no picture or sound, just a red blinking light.
Open up the unit and found some bad caps. Replaced bad caps & retested the tv. Now I get signals but
no sound. Hope this the right place for this. Will upload some pic if I can.
Thank You.Last edited by SURFER7; 04-10-2013, 06:10 PM.Leave a comment:
-
Re: HP 1905 No power. No led. No output voltage.
I just fixed mine. It was the fuse. 2.5A 250V fuse replaced with a 2A 250V and it worked
the first power on. I found this on the road. [url]http://www.youtube.com/watch?v=BuVxN-ovg-g[/url]Re: HP 1905 No power. No led. No out...xN-ovg-g[/url]Leave a comment:
-
Re: HP 1905 No power. No led. No output voltage.
newbie1 did you happen to fix the f1905e LCDLeave a comment:
No activity results to display
Leave a comment: