I have a sony KDL 32S3000 that has a bad picture. Fuse F4003 had blown which caused a error code. The tv would come on shut off then flash the led . After replacing the f4003 fuse the tv stays on but the picture has very high contrast and can not adjust to bring it back to normal. I cannot find what circuit that f4003 powers. it is shown on the picture of the board but not shown in the schematic that i have. I replaced the T-con board because IC (U8) AS34-G on the t-con board was running very hot. I can not find any information on the t-con board. Thought it might be defective. AS32-g on the new...