Hello,

i am coming from another thread (request schematics) and need some hints for this laptop:

My problem is with the laptop if you push the power on button it starts for 2 seconds and goes off. So i took it apart and started to measure the voltages for 1,8V and there is no voltage at the conductor PL8200, there is a short to ground somewhere in this area.

The next i tried i desoldered mosfet PQ8201 and C2627 and C2617 and started to turn on the laptop and then the schottky diode PD8201 started to smoke...

Removed the PD8201 and the...

Re: Asus N76VM N76VZ Boardview + Repair Guide

Hello SMDFlea, thanks for your reply. Well it seems i bought the wrong software :-X ...

(I googled for the file extension .FZ and google told me for the PCB program Fritzing... )

OK now i tried Boardviewer and it works like a charm. My problem is with the laptop if you push the power on button it starts for 2 seconds and goes off. So i took it apart and started to measure the voltages for 1,8V and there is no voltage at the conductor PL8200, there is a short to ground somewhere in this area.

The...

Re: New Members - please post your introductions here

Hello, i am also a newbie to this forum. I am da_buzz from europe. Looking to find here good tech tips and of course if i can help others i will do so. Keep it fixing

Re: Asus N76VM N76VZ Boardview + Repair Guide

Hello, i am new to this board and have also an problem with an Asus N76V laptop. I downloaded and paid via paypal the fritzing program to be able to view the board diagram. But as i try to open the file in fritzing it occurs an error at opening:

The XML Code for component 1 has an error in line 1: error occured while parsing element.

Does anybody have the same error and knows maybe the solution? Thx a lot