Re: 2 GPUs in need of re capping puzzlled on what caps to get



certainly will try better sorry. just figured there was enough information off the top of these caps to just state them have some one read them and able to get them replaced....

Re: 2 GPUs in need of re capping puzzlled on what caps to get

well the last one is not bad yet just was getting just in case if it never goes bad then no worries. but a few 16v 330 and 270, and all of the 6.3v 1500 the rubber has pushed out of the bottom ripping one lead out of its solder hole. and no they are not Nividia boards. the rest i was getting for just in case back ups. but really if they never do go than i wont worry about it.

Okay i have a two GPUs' to re cap both have different sets of caps i'm kinda stumped on what ones i should get the list it
All are; pink or slight red from pink, letters with the half-moon negative on top

6x ULR/6.3v/1500/ZA
3x ULR/16v/330/Y(small D with a _ )
2x ULR/16v/270/YY
3x (C with a arrow in clockwise arch to and threw top)/EPS/820/2.5v
2x ULR/4v/560/YZ

and the confusing one of em all a
1x LF/270/C/971 (its blue with the negative half moon on top)

if i can get links to what compactor that are or will...