Re: HELP! Samsung PS51D450AW2 (S50HW-YB07) No sound No Image
Thank you all for your inputs.
Today my Transistors arrives, i replaced the known damaged ones 2pcs and verify all connections i.e the flex ribbons and all other connectors.
Voila.....
It works..
Thank you all.
All your write-up on troubleshooting really helps.
Thank you all for this wonderful community.
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: HELP! Samsung PS51D450AW2 (S50HW-YB07) No sound No Image
More picture of my X-main
Thanks Tom66 for the great write up here [url]https://www.badcaps.net/forum/showthread.php?t=18542&[/url]
it helps alot....Re: HELP! Samsung PS51D450AW2 (S50HW...helps alot....Re: HELP! Samsung PS51D450AW2 (S50HW-YB07) No sound No Image
More picture...
Leave a comment:
-
Re: HELP! Samsung PS51D450AW2 (S50HW-YB07) No sound No Image
After Troubleshooting all Board.
here are my findings......
I found 3 [B]Bad[/B] Transistors on the X-Main Board.Re: HELP! Samsung PS51D450AW2 (S50HW-YB07) No sound No Image
After Troubleshooting all Board.
here are my findings......
I found 3 [B]Bad[/B] Transistors on the X-Main Board.Re: HELP! Samsung PS51D450AW2 (S50HW-YB07) No sound No Image
After Troubleshooting all Board.
here are my findings.........
Leave a comment:
-
HELP! Samsung PS51D450AW2 (S50HW-YB07) No sound No Image
hello Great Minds,
I need help troubleshooting this Tv
Samsung PS51D450AW2 (S50HW-YB07) Manufactured 2011.03.12
Voltage Present on the SMPS BOARD are (+15 and +5) also present on Logic, Main,X &Y Board
Voltage missing on SMPS board are (Vs, & Va) reads 0v
Responds to all button on remote but no [B]sound[/B], no [B]image[/B]
When X main Board is disconnected and powered on with source connected,.
it flashes image on screen for a half sec then disappears. then Vs voltage goes up from 0 to 205v then goes...
-
Step by step Troubleshooting your LCD Power Board
Hi,
Lets all share our knowledge on successfully troubleshooted DEAD Power board.
-
Re: New Members - please post your introductions here
hi all,
I'm new here and what brought me here is to learn more from you guys about troubleshooting a Switch Mode Power Supplies. I have a problem with my Amilo LCD monitor
Amilo LXL 3220W
it went dead without no standby light. which i had removed its power pack and measure its output voltage to the main picture board and reads normal 5.1/5.2vdc
pls i need tips on what to do next. thanks
Leave a comment:
No activity results to display
Show More
Leave a comment: