Re: Samsung UN65EH6000F power supply IC801
On closer look, yup, you nailed it.
Looking at the datasheet [url]https://cdn.badcaps-static.com/pdfs/6ceb383c6b6bc5b464c98c1be5f4a446.pdf[/url]
Is there any disadvantage in using the higher rated 2100 part over the 1700 part?
They are pennies difference from mouser/digikey.Re: Samsung UN65EH6000F power supply...]<br />
<br />
bkeith
New Member
Last Activity: 02-01-2022, 08:53 AM
Joined: 05-07-2011
Location: Ont.
-
Re: Samsung UN65EH6000F power supply IC801
Thanks. It looks pretty similar, but the installed IC has 9 legs and the datasheet for the FSFR line shows 10 legs with one missing.
And I scraped of the silastic and the last two letters of the part number are "AC".
I'll pull the board and start following traces to see if it is compatible.
I've found schematics for other BN44 power supply boards, but not this exact one, BN44-00560A.
If anyone else has links or notes, please speak up.Leave a comment:
-
Samsung UN65EH6000F power supply IC801
I picked up a Samsung UN65EH6000F locally because the seller said it "just died" one day.
Power supply board is PSLF131C04E aka BN44-00560A.
On visual inspection, it appears that ICM801 is blown out. Most of the surface is cratered out so I can't even read a part number.
Another post about this same model refers to it as the SMPS driver. That makes sense as there is no power activity.
I'd like to find a schematic or at least identify the part number and order a replacement if possible.
Thank for any assistanc... -
Re: Eeprom dump thread!
Odd, can't edit my own post.
The above should have been JVC LT-42EM73 of course....Leave a comment:
-
Re: Eeprom dump thread!
Is your repository still available somewhere?
Kindly hoping to find firmware/EEPROM dump for a LVC LT-42EM73
Regards...Leave a comment:
-
Re: Eeprom dump thread!
Glad this thread is still going.
I have a JVC LT-42EM73
Main board: M24/G33767/12 or 2C.AJ001.Q42
Panel: T420HW08 V8
Need the EEPROM dump please.
Power LED always stays blue. No BL or image.Leave a comment:
-
SOYO DYLT032D TV PS schematic
Hello all,
I've had a good deal of success replacing caps in LCD monitors and TVs, as an amateur, but right now I'm stalled on the latest TV that I'm working on.
I picked up a Soyo DYLT032D LCD TV which appears to have either PS or inverter issues. The power LED turns on and off properly, the audio amp sounds like it is powering up properly. There just seems to be no backlight.
No obvious swollen caps, so what I really need is a schematic for the power supply. It's a FSP230-5M01.
Thanks.
No activity results to display
Leave a comment: