Re: Parallel Battery Configurations for mobile phone battery
Thanks for the info
O that battery from ebay does work and has 3500mah I have one now and it last 2.5 times on her then the stock 1500mah I did some charge and usage time comparison and it's good but I want something more I just worry it may go boom if I run it in parallel.
I will check that link out later when I get home. I thanks for all the info keep Em coming!
alick
Member
Last Activity: 06-24-2012, 02:23 PM
Joined: 05-06-2011
Location:
-
Parallel Battery Configurations for mobile phone battery
hey guys i got a question about Parallel Battery Configurations?
this is what I want to do!
take two of these batteries [url]http://www.ebay.ca/itm/New-Battery-LG-P990-Optimus-G2X-2X-Extended-Door-T-mobile-3500-MAH-/170854215958?pt=PDA_Accessories&hash=item27c7b47116#ht_500wt_1396[/url]
take em apart and rebuild it with then both in parallel so i can get double the mAh out of it! it 3600mAh each so I would get 7000mAh battery.
I am wondering if this is possibly at all?
would it be as easy as taking them apart and just putting them...Last edited by alick; 06-23-2012, 04:57 AM. -
Re: Samsung LN-S4041D Repaired - Finally
ok I am having the same problem with this unit as well. it wont power on. when i plug it in the power goes click like it trying to power up and then it clicks off again but the red light on the front of the tv blinks 4 times.
I already replace 19 of the 20 caps on the board and still same thing. the only cap i ddint replaces is the that really big one in the center of the power board. there were 2 x 50v 1uf caps I replace with 63v 1uf caps. the guy at the store said it would me fine.
I just wondering...Leave a comment:
-
Re: higher volt caps ok?
sweet I just wasnt sure and figure i should ask first before doing the switch..
thanks
...
Leave a comment:
-
higher volt caps ok?
hello I am replacing caps on a power board for an lcd hdtv and i have some caps that are 50v 1uf that need to be replace. the guy at the electonirc store sold me some 63v 1uf caps?
will those caps work or will they cause a problem?
I would like to know before i go and replace them off the board
thanks in advance.Last edited by alick; 09-24-2011, 09:17 PM. -
need help with RCA L32HD31 tv problem
hello I just got a rca 32in lcd tv model l32hd31that doesnt work.
[URL="http://youtu.be/mMxgPTBCYSk"][URL="http://www.youtube.com/watch?v=mMxgPTBCYSk"]http://www.youtube.com/watch?v=mMxgPTBCYSk[/URL][/URL]
the tv as you can see from the video turns on with blue lines at the top then it becomes a blue bar as the rest of the screen warms up and goes white.
I am wondering if anyone can point me in the right direction before i start taking it apart.
Has anyone encounter the same problem before.
also I was told...Last edited by alick; 07-25-2011, 07:41 PM. -
Re: mag 2200w lcd wont power on
ok so i got a replacement board and it works great and now i have to to try and fix other board and it looks like i can but bigger caps on it. i will post an update once i get the caps in and replace itLeave a comment:
-
Re: mag 2200w lcd wont power on
hey yeah i test that fuse on the setting 200 and it came back with.4.
I also I know the lcd doesnt work when it goes dark cause I have two displays hooked up and when that one turn on for 1 second my main desktop goes to the mag then it jumps back to my samsung and then does it again and speakers goes pop about 10 times then same thing again. I have order that one part from jimmyshop already but I want to work on this one. still until the part gets here I hope that replacement board will do the trick.Leave a comment:
-
Re: mag 2200w lcd wont power on
[url]http://www.shopjimmy.com/860-ab0-190dtlb-p1h-power-supply-backlight-inverter.htm[/url] this one is the right one??Re: mag 2200w lcd wont power on<br /...he right one??Re: mag 2200w lcd wont power on
[url]http://www.shopjimmy.com/860-ab0-190dtlb-p1h-power-supply-backlight-inverter.htm[/url] this one is the right one??Leave a comment:
-
Re: mag 2200w lcd wont power on
i found that transformers but i think I might just get the board instead. and maybe just use the old board for parts and to tinker with?
[url]http://cgi.ebay.com/2X-TRANSFORMER-730-703-190DTL-Viewsonic-PI-190DTLB-/260737091450#vi-desc[/url]Re: mag 2200w lcd wont power on<br /...#vi-desc[/url]Leave a comment:
-
Re: mag 2200w lcd wont power on
[url]http://www.shopjimmy.com/mirage-860-ab0-220dtlb-pch-power-supply-backlight-inverter.htm[/url] will this board here work as a replacement???
or
[url]http://www.shopjimmy.com/860-ab0-190dtlb-p1h-power-supply-backlight-inverter.htm[/url]Re: mag 2200w lcd wont power on<br /...rter.htm[/url]Re:Last edited by alick; 05-14-2011, 04:14 PM.Leave a comment:
-
Re: mag 2200w lcd wont power on
ok so i measure those two the red and the yellow and they both are at 768 on the resistances. the metere was seT to 2000 was I doing it right? and is that reading ok or is there something wrong?Leave a comment:
-
Re: mag 2200w lcd wont power on
ok guys I got the mosfet in and while i was de-soldering them the first one came off without really any problem. the second one both leads broke off while i was attempting to use twizer and de-solder them. after placing them in and hooking everything up its still does that but now the picture come on for a second then off. I guess the next thing is to change the caps. I will need to see if i can find any cause the stores i went to had some but they are way to big. anyways i will keep posted!Leave a comment:
-
Re: mag 2200w lcd wont power on
Ok. Hmm maybe what I will do is get the cheap one now and get the other one once it goes on sale. Its good to know Canadian tire would have been the last place I would have lookedLeave a comment:
-
Re: mag 2200w lcd wont power on
do you think this one will do??
[url]http://www.mainelectronics.com/UT20B.html[/url]Re: mag 2200w lcd wont power on<br /...20B.html[/url]Leave a comment:
-
Re: mag 2200w lcd wont power on
Ok then my plan is set. ThxLeave a comment:
-
Re: mag 2200w lcd wont power on
which of those multimeter will do the job? I have to pick on up tomorrow. also I trying to keep my budget under $45 if possible?
[url]http://www.leeselectronic.com/[/url] will that one for $18 do it?Re: mag 2200w lcd wont power on<br /...for $18 do it?Re: mag 2200w lcd wont power on
which of those multimeter will do the job? I haveLeave a comment:
-
Re: mag 2200w lcd wont power on
no no don't be sorry, I don't mind, its all learning to me.
I will go get the caps too and just replace em all so it eliminate the possibly of them being bad. i guess i should get a new solder iron and kit as well.
thx
I will updated you after i get the parts and give it a go. I have to wait until monday to order them from the parts store and wont get them until friday most likelyLeave a comment:
-
Re: mag 2200w lcd wont power on
no he just looked at it and show it to another person and they both said i dont need the caps they are fine. the other guy from the tv store said the same thing about the caps. I think I should just get a mulitmeter and test everything myself that way i know what is good and what is not. I just dont wanna remove the caps if they are infact good still. they look almost new
ps: he tested the fuse and they where both fine.Leave a comment:
-
Re: mag 2200w lcd wont power on
ok well what I will do is go get the parts and try it and see if that will work. i mean you have fix it and had the same problem so I hope maybe i had the same problem and it will be an easy fix. I guess I should invest in a multimeter and a new solder iron(my old one I'm not sure if it works still.) if i going to be doing all these DIY repairs.
well i will call the parts guy and order the mosfit and see about the cap even though they already told me the caps are fine.
also i will read this guide you are talking about it seems to hold...Leave a comment:
No activity results to display
Leave a comment: