Re: G40-30 / G50-30 NM-A311 Boardview And schmatics
thanks very much broo!
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
-
Re: LG Television - 42LG50-UA
If you have already checked that all the voltages at the source and they are fine also if you checked all the voltages of the dc-dc converters and voltage regulators of the main motherboard and they are fine then yes
Leave a comment:
-
¡¡PLEASE!! I NEED BIOS and DUMP of positive bgh ql 300 board 6-71-w3100-d03a
I need help from the most pro in Hardware. i am checking a computer a positive bhg ql 300 the board is
of the clevo brand the plate number is 6-71-w3100-d03 it turns out that I press the power button and it does not do it absolutely
nothing I check tension in the button and there is no this tension is 3.3VS this is enabled after the activation of SusC and susB
It turns out that these signals are not present either, they are enabled with the signal DD_ON signal that comes from the ITE 8518E
Should this signal be present just by energizing the equipment? In the power-on...
-
Re: I NEED BIOS AND EC BIOS THE NDBT140x v1.2
the main board is ndbt140x v1.2 the model of notebook is smart r8-ce
there I upload the bios and ec Bios backup...
Leave a comment:
-
I NEED BIOS AND EC BIOS THE NDBT140x v1.2
HELLOW! I' Speak Spanish, i try write in English i have a notebook exo model smart r8-ce, it isn´t showing image on the display and the cooler turns and stop after a while. I suspect that it is the Bios or Ec Bios the culprit
please do i need Bios and ec bios if they have a schematic of it, it suits me
thanks.!!: compy:
-
Re: SONY KDL-55W905A 4 Blinking Red light
me olvide de decirte que la escala en la que tiene estar tu multímetro es en el rango de los 20V es muy importante ya que si pones una escala menor por ejemplo 2V y mides una tensión de 12V puedes dañar tu multímetro
Leave a comment:
-
Re: SONY KDL-55W905A 4 Blinking Red light
bueno por lo que decís la fuente te debería estar mandando la tensión de stanby para que encienda el tv,
Primero te diría que agarres el multímetro y lo pongas en la medición de tensión esta señalado por una V- y una raya recta (-) que tiene por debajo tres puntos no puedo poner los tres puntos debajo del guion seguido por eso solo pongo el guion espero que lo entiendas.
Segundo una ves te encuentres con el sector que se encierra por el símbolo (V-) el multímetro estará en medición de Voltaje continuo con esto deberías...
Leave a comment:
-
Re: z5wah la-b162p bios+ec chips
reprogramming the bios ec is not the same as reprogramming the bios? there should be no problems right? both are eeprom memories
Leave a comment:
-
Re: In need of lenovo B50-50 NM-A681 SCHEMATIC
many thanks...Last edited by SMDFlea; 05-28-2021, 10:15 AM.
Leave a comment:
-
Re: New Members - please post your introductions here
hola mi nombre es tesla_2020 soy estudiante de Tecnicatura en Electronica Universitaria me faltan 3 materias para recibirme Dios quiera que sea pronto soy de Argentina - Salta empeze a dedicarme en esto de la reparacion de hace 2 años he reparado un poco de todo empezando desde una radio vieja hasta una notebook me llevo bien con lo que es hardware y en software no tanto tengo que aprender mas de eso desde ya gracias por permitirme fomar parte de este foro
Leave a comment:
No activity results to display
Show More
Leave a comment: