Re: dell 2000fp monitor
I got the new power supply cord . plugged it in and the monitor started working just like it was supposed too!!!! Thanks again
rquig
New Member
Last Activity: 06-16-2011, 04:08 PM
Joined: 04-30-2011
Location:
-
Re: dell 2000fp monitor
Thanks to you focusing my attention on the power I have discovered that the supply amperage is only .3 while the monitor requires 3.5. The voltage is correct.Leave a comment:
-
Re: dell 2000fp monitor
the video source diode is on and can be changed to select source and the main power supply diode is on and can be turned off and on. everytime the monitor is turned on you can see the white flash. The diodes are both green in color. what amperage should this monitor require? I'm not sure that it has the right power supply.Last edited by rquig; 05-02-2011, 07:43 AM.Leave a comment:
-
Re: dell 2000fp monitor
Thank you I have looked at that thred and it is similar, infact it is what gave me a starting point. That said, I don't have the same symptomx and I don't have any obvious singns of component failue. I get a white flash for about 2 seconds and then nothing.Leave a comment:
-
dell 2000fp monitor
I could use some advice on what to do next in trouble shooting the dell 2000fp monitor.
symptoms: When power is applied I get a white flash on the screen and then it goes blank.
What I have done: I tried to get a response from the brightness or contrast buttons -- Nothing. I removed case and tried to find a obvious component failure or burned spot -- nothing. I checked the f1 fuse -- It checked good.
I am not sure where to go for the next step, help would be appreciated. -
Re: New Members - please post your introductions here
myname captrquig
age 68
I appreciate the opportunity to ask technical questions and am looking forward to viewing expert advice.
Leave a comment:
No activity results to display
Leave a comment: