Re: identify surface mount capacitor

i'm just looking for the value not the particular brand. sorry didnt have macro on phone. numbers are 33 and 25k.

i know, i know. sorry for the stupid question. still learning...

anyhow while replacing a ysus hybrid chip i accidently pulled off a surface mounted cap on the ydrvtp board second picture c23, dont ask lol.

i really dont know a thing about reading them and i tried google and it wasnt my friend

picture attached. a digikey part number would be fantastic.

thanks so much in advance.

tim...

played a guessing game and figured out the t-con board was bad. old t-con, no picture but there was sound of course. new t-con got picture but in wide screen, auto, 16:9 and super zoom anything that stretches to the edges of the screen i get lines like the ones in his video. Picture is perfect in non full screen modes. also input doesnt matter.

picture is just like the one in this thread:

[URL="https://www.badcaps.net/forum/showthread.php?t=8215"]https://www.badcaps.net/forum/showthread.php?t=8215[/URL]

i also had ordered the main ssb board...

Re: Vizio VW42L HDTV10A no picture or sound




okay, rmoody. First off ignore U4 and ce9 and ce10. all three DO NOT have anything on or in them. leave them alone.

as stated yesterday i used the following parts and probably over killed the replacement of caps, but since i dont have an ESR meter yet i felt better safe than sorry. and yes i always order one extra of everything in case i screw up. although since there are 17 of the 220uf caps it was cheaper to order 25

here is what i ordered from mouser and im sitting here watching...

Re: Vizio VW42L HDTV10A no picture or sound



component. i'm working on one and its about 20 bucks shipped from mouser unless you need chipquik like i did which makes it almost 30 bucks shipped.

you might also consider ordering caps for both inverters as 3 of four of mine were bulging. i can give you part numbers if you like. and ill let you know if all my parts work later tonight if the usps hurries up ...

Re: New Members - please post your introductions here

tim here and just wanted to say kudo's to all that post there experiences. ive repaired one monitor and two tv's based off of information and suggestions here. outstanding work everyone and keep it up. ill try to add my own two cents when warranted