Ah, what a classic moment. Just right after this post I tried one last time, with just RCunlocker, and got the password removed. So, thanks for the emotional support, I guess? 😁
And sorry for unnecessary post....
p.puhakka
New Member
Last Activity: 06-18-2024, 01:27 AM
Joined: 03-25-2021
Location: Uusimaa
-
Asking for help again. I have one 735 G6, that just does not wanna work with me. There is two 16mb chips, and the correct one is on the back side of the board. Tried RCunlocker and HPunlocker, but no luck. Tried them on the front chip too, no luck. Password still on.
Attached is both of the files, maybe someone can help me? Many thanks!
And here is the laptop info:
S/N: 5CG946812D
EliteBook 735 G6, 5VA22AV
Thanks a lot in advance!...Leave a comment:
-
Ah yes, this did the trick and password is gone. Many thanks to you!...Leave a comment:
-
Thanks, tried both and got it booting ok, but password still on, strange? Tried one more time also RCunlocker, but no luck.
Any more suggestions? Thanks a lot!...Leave a comment:
-
I use this thread because I got the exxact laptop that im working with. I was trying to remove bios-password, and after I modded the EC chip, password was still on. But after I try to flash the MAIN chip, laptop just boot loops, and fans on full speed.
Maybe someone can check, whats wrong with the MAIN?
Model: HP ZBook Studio x360 G5
S/N: 5CD9492HNX
ProdID: 2YS51AV
Motherboard: DA0XW1MBAI1 REV: I
Attached both files. Thanks a lot! ...Leave a comment:
-
Yep, that was propably the only topic that I found about this. Finally had some time on weekend, and here is copy of my answer:
Finally I got time to continue testing on weekend. I got another usb-stick, and inject the logo with UefiModL-tool, flashed in DOS, and works great! It only flashes the logo in my case, so after that I also flash the newest BIOS with another usb-stick, and everything fine after that.
So works now, and with that tool you can change the logo. Thanks!...Leave a comment:
-
Fujitsu Esprimo K557/24 allinone desktop, boot logo
Hello forum!
I have received a lot of help here, regarding bios modding. Very thankful!
Now I have a lot of Fujitsu K557 desktops, and those have custom bios logo/custom splash screen, and I need to change them to the original Fujitsu logo.
I am looking for the easiest way, because I have about 40pcs of them, and I think there is some "official" way to do this.
I have tried a lot of Fujitsu tools, which can inject the logo to the bios file, but no luck.
Any suggestions? Thanks! -
Re: bios dump elitebook 840 g3
Sorry, my bad! Ah, the RCUnlocker, completely forgot that program. I'll try that and come back with the serial numbers if it wont work. Have a great weekend!...Leave a comment:
-
Re: bios dump elitebook 840 g3
Hello, and thanks for this awesome forum! I have few Elitebook 840 G3 laptops, that have Power on passwords, and HP unlocker does not do the trick. Can someone help with these? Thanks!
...
Leave a comment:
No activity results to display
Leave a comment: