Re: Tannoy Reveal 6D



seems you could be right!
digital i.o disconnected after snapping a few cables on the connectors and replacing them i fired it up for quick hillbilly bench test. (see pics )

they popped and hissed a little. turned them off quick as they do get very warm turned them on a second time with a little wiggly waggle here and there i believe i also have another defect cable connector.
gotta find a replacement cable now or hardwire it?

might also place a new heatsink on the back and weld the 2 wire wound...

Re: Tannoy Reveal 6D

ok here goes i got a pair of 66d's and one of them decided to give up. before searching online i took the whole thing apart and now i dont know how to put it back together

absolutely disgusted with the amount crap smeared around the pcbs. appears that all here are in agreement there?
powers up fine the led on the front switch works, on the signal input i got nothing the red green led o the backside any hints tips would be appreciated
schematics here ive downloaded, could but not wanting to crack the working one open (i...

Re: New Members - please post your introductions here

here goes hopfully got it right.
my oldman is a full on elctronics freak so as a kid i was always tinkering and love the smell of solder. i qualified many yrs ago cable loom/harness manufacturer and a protortype eletronics engineer then worked for a multi national company that produced the first alpa numeric pager system but the world was to small always wanted more to do and didnt stick with it these days im what you would call a bodger in the old context that is from car mechanics to plumbing and anything...