hello again. today i finally managed to read both chips properly.
at first i tried to read and create backups without desoldering the chips with a selfmade probe made out of wires and pogo pins. but with no luck. everytime different results when comparing the backups. reason was that i´m a bit afraid of destroying the board/chips when de- and resoldering the chips over and over again. hope that someone can remove password from attached files and it works on first try.
@sharp
Thanks for your answer and sorry for the late reply, but i didnot have much time past weeks.
Having the second chip on the lower side of the board, i read on threads about other models but because of no time i wasn´t able to have a look at. today i took the time and unscrewed the board.
But as you can see on the pictures added, i have two winbonds (both 256Mbit) on my board. So how do you know that the MX25L25673G was the right one to chose on your board???
where do i find the ec chip? is it one of the red marked ones on the pictures below? i don´t wanne order the programmer if i´m not sure that i can fix the bios.
i have read many post on google and here about bios pass removal from various hp models but i couldn´t find any information about a HP Elitebook 845 G7
i found the bios chip on the board. it is a [B]winbond 25Q256JVEN[/B]
i don´t have a dump right now because i don´t have the correct programmer.
but before ordering a programmer i want to ask about the procedur.
at first i will have to order a TL866II PLUS and create a dump from the winbond.
but after that? will the HPUnlocker be able to remove the password?...
Re: New Members - please post your introductions here
Hi there,
my name is phillip, i´m from germany and 45 years old. found this board via looking for some bios modifications. as far as i saw, very nice collection of informations and good help to learn. happy to be here
Leave a comment: