User Profile

Fluval replied to IBM ThinkPad X32 Bios Password

in BIOS Requests ONLY!

04-16-2011, 12:36 PM
Re: IBM ThinkPad X32 Bios Password

Here is the link you need - X32 supported

[url]http://www.allservice.ro/forum/viewtopic.php?t=47&start=0&postdays=0&postorder=asc&highlight=x32[/url]

FluvalRe: IBM ThinkPad X32 Bios Password<b...<br /> FluvalRe: IBM ThinkPad X32 Bios Password

Here is the link you need - X32

See more | Go to post
Leave a comment:
Fluval replied to IBM ThinkPad X32 Bios Password

in BIOS Requests ONLY!

04-16-2011, 12:29 PM
Re: IBM ThinkPad X32 Bios Password

Wizard is correct [url]https://www.badcaps.net/forum/images/smilies/worthy.gif[/url] - but it can be done - takes a bit of work
Here is info for the IBM T61 just to give you and idea of what's invloved.
[url]http://www.allservice.ro/forum/viewtopic.php?t=779[/url]

FluvalRe: IBM ThinkPad X32 Bios Password<b...idea of what's

See more | Go to post
Leave a comment:
Fluval replied to HP Pavilion dv2000 laptop with a dim display.

in Troubleshooting Laptops, Tablets, and Mobile Devices

04-16-2011, 11:47 AM
Re: HP Pavilion dv2000 laptop with a dim display.

Have you measured the Voltage at the inverter - think it should be about 19V - check it at the fuse on the inverter !

See more | Go to post
Leave a comment:
Fluval replied to Anyone reccomend a place to get schematics

in Schematic Requests ONLY!

04-16-2011, 10:34 AM
Re: Anyone reccomend a place to get schematics

Hi unlockdev

That was quick but would you have it for an Acer TravelMate 5330 it's different that the Aspire.
TM5330 is also the same as Extensa 5230/5430/5630/5630Z/5630EZ

Cheers
Fluval

See more | Go to post
Leave a comment:
Fluval replied to Anyone reccomend a place to get schematics

in Schematic Requests ONLY!

04-16-2011, 09:54 AM
Re: Anyone reccomend a place to get schematics

I would recommend notebookschematic.com used them in the past - very helpfull.

Hi Unlockdev - I need a schematic for an Acer TM5330 - trying to fault find missing 3.3V & 5V and I think it's a faulty TPS51125.
Would you have that schematic to hand?

Thanks
Fluval

See more | Go to post
Leave a comment:
Fluval replied to Fujitsu Siemens Amilo Xi 2428 failure

in Troubleshooting Laptops, Tablets, and Mobile Devices

04-16-2011, 08:34 AM
Re: Fujitsu Siemens Amilo Xi 2428 failure

Is this a fresh install? Have to tried Fresh install?
Try installing the Intel INF Drivers
Updated the drivers for Lan and Wifi
Have you tries new memory - if you have 2 modules remove one and try and then swap them and try again.
Run MSCONFIG and try Diagnostic startup or Selective startup and load only the basic services ie video.

Fluval

See more | Go to post
Leave a comment:
Fluval replied to Dead Thinkpad R30 and R31 series.

in Troubleshooting Laptops, Tablets, and Mobile Devices

04-15-2011, 04:44 PM
Re: Dead Thinkpad R30 and R31 series.

See attached - check this Cap...

See more | Go to post
Leave a comment:
Fluval replied to Dead Thinkpad R30 and R31 series.

in Troubleshooting Laptops, Tablets, and Mobile Devices

04-15-2011, 04:20 PM
Re: Dead Thinkpad R30 and R31 series.

What's your MB Part number ?

See more | Go to post
Leave a comment:
Fluval replied to Dead Thinkpad R30 and R31 series.

in Troubleshooting Laptops, Tablets, and Mobile Devices

04-15-2011, 03:29 PM
Re: Dead Thinkpad R30 and R31 series.

Hi Wizard

Is the standby voltage present at the power switch - I assume you checked this but just need to know.
Have you tried another CPU lower spec just in case the Bios revision of the new MB might not support your current processor. Also some makes of laptops wont power on without the CPU.
Have you removed the Cmos Battery?
Try Disconnecting everything except CPU & Ram.
I know the above are fairly basic checks but you never know

Hope this helps
Fluval

See more | Go to post
Leave a comment:
Fluval replied to New Members - please post your introductions here

in Announcements & Related News

04-14-2011, 04:46 PM
Re: New Members - please post your introductions here

Hi all,

I can remember the day 20 years ago like it was just yesterday when I started repairing Commodore 64's and Sinclair Spectrums to component level - Nothing has changed except the components are now of much better quality but they still fail so that keeps me happy.

Hope to share my knowledge and gain some more with this community.

bfn
Pedro

See more | Go to post
Leave a comment: