Re: LP2407 or FPD2485w No picture after cap replacement.
I will replace the caps on my video board as soon as they arrive. Hopefully thats the culprit.
Blenderboy
New Member
Last Activity: 04-14-2011, 03:08 AM
Joined: 04-12-2011
Location: San Jose CA
-
Re: LP2407 or FPD2485w No picture after cap replacement.
Sorry for the vague post. I thought I would keep it simple at first with the basic info and symptoms.
I'm not an electronics guru, just a guy with a soldering iron.... and I'm not afraid to use it!
I replaced all but the large Cap on the power supply and the two on the (inverter?) board. These were from LCD Alternatives. I can only assume that they are good quality. They all matched what I removed.
I don't believe I have back light. The screen is completely black. If the back light...Last edited by Blenderboy; 04-12-2011, 11:05 PM.Leave a comment:
-
-
-
-
-
-
LP2407 or FPD2485w No picture after cap replacement.
Thanks in advance for any help!
I got this broken monitor free, and decided to try to fix it.
I have no picture.
I've replaced all the caps. Now the menu bar and power button light up and stay blue. If I unplug the signal plug, the power light turns orange. Does this mean its at least sensing a signal?
I have tried to look for picture with flashlight, but see no picture.
I have seen other posts suggesting I check fuse F1 and Mosfets Q1-Q4
Anyone else have other suggestions?
Thanks,
Blenderb...
No activity results to display
Leave a comment: