Re: Panasonic FZ-G1 MK3



I messed up the pads on the chip during soldering so cannot try it :/

But thanks for the try anyway!...

Re: Panasonic FZ-G1 MK3

Here is another version dumped, this seems to have more data inside at least when viewed via UEFITool?...

Hi guys, this tablet is with boot password set, cannot enter bios or boot. Can the pwd be removed? Dump done via the programmer so hope its OK
Thank you!...

Re: RCUnlocker

HEY! Computer is back up running! It seems my USB extender cable was the issue. With programmer directly connected to the computer, verify went fine and computer booted up.

EDIT: Thanks hoaca388, computer is now fully working thanks to your bios file, updated to latest version and password is gone as well

Re: RCUnlocker

Thanks for quick reply! When I try to flash file you provided the programmer will flash it but then when I want to run verify it will throw this error: Verification error on address: 0x00000091, Device: 0x0B, Buffer: 0xFF

EDIT: I also noticed that when I want to do Erase, its done in like 30 seconds. From what I rememeber when I was doing it for some older computers, it almost took the same amount of time as flashing...or is my memory serving me wrongly?

Re: RCUnlocker

Hi guys,

so I have Zbook 14 G4 where BIOS was locked. It was working fine but now when I find this thread I thought I will remove the pwd. I found two chips at the motherboard, both Winbond. One with only 1MB of data and second one with 16MB of data. Dumped this one using CH341 programmer, dropped to RCUnlocker and it generated unlocked.bin.

Now, when I flash either the unlocked or even original to the chip, the computer will not turn on, only fans kick in to max and lights with backlight is on.

Any idea how this can be...