Re: DAC-19M008 Subs

Nope didn't work. On button stays orange. Then when I turn off power strip monitor flashes.

Re: DAC-19M008 Subs

Ok I found a place to get a DAC-19M008 BF like what I have in mine.(Acer AL1916W Ab) Even showed the picture like mine but when it showed up it was a DAC-19M008 AF (they were selling these also)& it has the Audio plug/board on it. Will this board work in mine or do I need to send it back? Or can I disable a circuit and make it work.

Thanks,

Re: DAC-19M008 Subs

Ok let me start again. Hello My name Is Jay,
I was given the Monitor after all the Ele-Caps were changed and it didn't fix it.
What happened was is was working fine then went Black. The Green power LED stayed on. If the Video cable was taken off it would go orange, Put it back on and it would go Green.
I started doing some checking and found where the 8pin IC201 & 202 so I replaced them still the same.
So I found this place and read everything it had here on DAC-19M008 & Acer AL1916W ab. There was one that was saying there...

Re: DAC-19M008 Subs

OK while waiting for the OZ9910GN to show up I jumped F102 & F200 with a fine wire & read pin 10 on CN5 and it was 1.98v not the +5v it should be. Also the Power light doesn't come on when I press it. I seem to keep going backwards. I wish I could find a good schematic for the board with voltage testing points.

Help Please.

I have a Acer AL196W Ab Model. It has a DAC-19M008 BF power board.
Is there another PB that will work in place of the 08?

Green power button comes on and stays green if video is sent to it.
No Flashes no nothing. The Monitor just quit one day. All nine Caps have been replaced, as has IC201 & IC202. I have F102, F200, & IC200 a OZ9910GN on order.

I didn't have +5v on pin 12 of IC200 so F200 could be bad.
I think I blew F201 when I was testing for +5v on pin 9-10 on CN5 connector. It's testing open now.

Thanks...