Re: LG OLED65C9PUA no audio/video after delicate move
Where does one buy an LG service remote and Schema?
Thank You...
27grains
Member
Last Activity: 05-01-2022, 12:53 PM
Joined: 02-06-2021
Location: ohio
-
Lg 60la6200ua tv ebt62368510
I was using Goo Gone and it leaked to this board. I was told this chip get very hot and is known to fail, I want to prevent a failure. the adhesive is gone on the board side, I cleaned it and the board. It feels like rubber and is about 50mm x 40mm x 10mm in size. What can I use to replace it or how can I refurbish it?
What glue?
Would a better Heatsink on top of the chip Help?
Thank You... -
Re: LG 60" 3d TV LG60LA6200UA Screws and LED Beads
I found this video that explains the difficulty replacing led beads and lens vs replacing the strips.
[url]https://www.youtube.com/watch?v=zk-pRxSlH7U[/url]Re: LG 60" 3d TV LG60LA6200UA Screws...pRxSlH7U[/url]Leave a comment:
-
Re: LG 60" 3d TV LG60LA6200UA Screws and LED Beads
Thank you,
I was able to remove the reflector sheet with a Heat gun. I kept the heat gun moving and pulled as it peeled off....Leave a comment:
-
Re: LG 60" 3d TV LG60LA6200UA Screws and LED Beads
Yes I agree, a very difficult task. I see it on YouTube in very poor countries....Leave a comment:
-
Re: 60" LG 3D White Reflector Sheet
I received an email telling me to use a hair dryer to heat the plastic sheet to release the glue being careful not to overheat and damage the plastic sheet.Leave a comment:
-
Re: LG 60" 3d TV LG60LA6200UA Screws and LED Beads
Thank You...Leave a comment:
-
Re: LG 60" 3d TV LG60LA6200UA Screws and LED Beads
I haven't purchased any LED Beads. I am asking What exact LED Beads to use to replace all the LED's on all the strips. I Never implied replacing one LED Bead.
I want Part Numbers or size with mA rating and Voltage. I am not asking How to fix anything.Leave a comment:
-
Re: LG 60" 3d TV LG60LA6200UA Screws and LED Beads
You weren't correcting anythingLeave a comment:
-
Re: LG 60" 3d TV LG60LA6200UA Screws and LED Beads
That is NOT what I was asking, read the questions....Leave a comment:
-
Re: LG 60" 3d TV LG60LA6200UA Screws and LED Beads
What was the point of your remark?
I received not one part number for LED Beads or Lenses, procedures or any links to learn; just an emotional my way or the highway cognitive distortion....Leave a comment:
-
Re: LG 60" 3d TV LG60LA6200UA Screws and LED Beads
I have no idea why you would make a comment "If you don't want to listen to my advice".
I am here seeking every possible way to replace the LED's and/or the strips.
I have never done this before but my 3D TV broke, and after watching Youtube Videos from a man in Chicago take apart an LED TV and replace one led bead on a strip, rip the plastic sheet removing it then billing his customers drove me to do it myself and to come here for the best honest advice.
I bought a complete...Leave a comment:
-
LG 60" 3d TV LG60LA6200UA Screws and LED Beads
What size and head type are these circuit board screws?
On the LED Strip is :
SH S1 94V-0 N 1329. LG Innotek POLA2.0 60 Rev 0.1 L Type 2012.10.18
I want to know what LED Beads to use for replacement and where can I read and learn what size and voltage is correct without relying on an ebay seller
and where to buy them?
What is POLA2.0, L Type?
Most of the clear plastic (I'll call Filter Beads) glued over the LED Beads have fallen off leaving three black dots with clear plastic in them where they broke off. Do New Filter Beads have... -
Re: 60" LG 3D White Reflector Sheet
I am learning, everything is glued together, the white plastic Reflector Sheet is glued to the metal frame everywhere, under the Reflector Sheet the LED Strips have plastic round reflectors at each LED Bead & Filter Bead, it is glued to the strip and to the reflector Sheet.
What I discovered is 100% Acetone will remove the glue and not damage or melt the Reflector Sheet. This is my Learning TV, I have removed all he circuit boards, switch and replaced the screws, I have a metal sheet with plastic glued to it,...Leave a comment:
-
Re: 60" LG 3D White Reflector Sheet
What type of double sided thermal tape is used to mount the LED Strips?Leave a comment:
-
Re: 60" LG 3D White Reflector Sheet
Please tell me how you removed the glued reflector sheet?
This is my 3D TV LG60LA6200UA, I can't replace it. Time doesn't matter.
I mix Acetone and 90% isopropyl alcohol for flux remover. I don't know if acetone will melt the sheet.
Is the glue water soluble?...Leave a comment:
-
60" LG 3D White Reflector Sheet
I have the TV apart, What is the procedure to remove the paper thin white plastic reflector sheet without ruining it? The sheet is glued on almost everywhere.
Alcohol works on the edges, but the area over the LED Strips is extremely difficult. Is Acetone too strong? I don't want to melt the plastic.
What chemical will work?
Would a heat gun work or hair dryer?
Thank You. -
Re: TV Repair Reference Library
Getting "This site can not be reached"...Leave a comment:
No activity results to display
Leave a comment: