Re: ID parts & troubleshoot a short - UN75F6300AF Samsung TV
Bruce, took apart my TV last weekend to replace the bad LED strip (full story at link below... spoiler: I was successful ). I didn't see any indications of arching on any connectors. I will say when plugged in the TV to see the LEDs that were out (three rows) some of the bad rows had LEDs that were dimly lighting up intermittently (e.g. low voltage?). I really think the issue with having the LED row out for so long caused my power supply to eventually fail, but that's just my theory.
...
Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: ID parts & troubleshoot a short - UN75F6300AF Samsung TV
First, Thanks for all the suggestions!
So, no MOSFET "nearby", the capacitor was near a rectifier (18NM60N, [url]https://cdn.badcaps-static.com/pdfs/732afdb63927b69a6133a4c3b4fa564d.pdf[/url]). I'm measuring 6Mohm on one side, and infinity on the other...does that indicate a bad diode rectifier?
I've also found four MOSFETs near the 'top' of the board. FFPF20UA60DN is stamped on them. I think this is their datasheet: [url]https://cdn.badcaps-static.com/pdfs/387ad55af4e2eac3d2787d7967ef1ee7.pdf[/url]...Last edited by my-name-is-john; 02-04-2021, 03:46 PM.
Leave a comment:
-
Re: Samsung 75 LED UN75F6300
UPDATE: FIXED LED STRIP on 75"TV !!!
First, I need to say, my UN75F6300 is a bit unique. When we first bought it, it was our third TV in three months. My ~5 year old son at the time loved throwing things and in the span of a year had broken: A cell phone, a digital camera, a game controller, and two large LCDs on TVs. For protection, we put Velcro adhesive around the perimeter of our UN75F6300 and attached the thinnest piece of Lexan (020?) Amazon had. I say this only because I *THINK* having this added material on the TV helped with stiffening...
Leave a comment:
-
ID parts & troubleshoot a short - UN75F6300AF Samsung TV
Hello!
I have a Samsung 75" UN75F6300AF TV. This [URL="https://www.badcaps.net/forum/showthread.php?t=68854&highlight=UN75F6300AF"]thread [/URL]shows good photos of the various parts, I'll post my photos of my issues which are:
1) Identify what this 'yellow nub' is on the back side of my power supply circuit board. Is it important? where do I get a replacement?
2) find a source / replacement part for this 15D050 thermistor.
3) What is this little black chip? does it look ok? how do I test it/replace it?
4) how else would I troubleshoot...
-
Re: Samsung 75 LED UN75F6300
My TV (same model) has the same problem. Ordered strips off of Ebay and will be installing them soon. Will attempt the "suction cup" with 3-4 people to lift the LCD. Hopefully when successful will post pictures of a fixed LED strip (or will post a cracked 75" LCD panel).
Another note: this "DIM bar" happened a while ago on our TV. after about two months or so of the 'dim bar' the power supply blew (on Capacitor, the thermistor, and maybe something else). Not sure if the power supply was the issue, or if the bad...
Leave a comment:
No activity results to display
Show More
Leave a comment: